Umsókn:Sérstaklega notað fyrir skriðvírsög vél
1.Styður sjálfvirka skurðarstillingu, Aðlagar sjálfkrafa gönguhraða litla mótorsins í samræmi við stóra mótorstrauminn, og nær sjálfvirkri skurðarstýringu.
2.Hindrunarlaus flutningsfjarlægð er 200 metrar.
3. Styður tvöfalda hraða reglugerð fyrir stóra mótora og litla mótora.
4. Styðjið litla mótor sem snýr á sínum stað.
5. Styður vinstri og hægri hjól Lítil mótor Línuleg leiðrétting.
Líkan: DH12S-LD
Viðeigandi búnaður:crawler wire saw machine
Athugið: Þú getur valið eitt af þremur loftnetum. Sogbikar loftnetið er sjálfgefið staðalbúnaður.
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (Breytur stillanlegar)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
Lág spenna: Rafhlaðan í fjarstýringu er of lág, Vinsamlegast skiptu um rafhlöðuna.
Netið féll: Þráðlausa merkið er rofið. Vinsamlegast athugaðu kraft móttakarans, knýja það aftur, og endurræstu fjarstýringuna.
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, Kveiktu á aflrofanum, andthe display will show the motor speed, sem gefur til kynna árangursríka gangsetningu.
2.Large motor and speed regulation
Snúðu “áfram/öfugt” Skiptu yfir í áfram, the receiver’s large motor will turn on, and the display will show forward
Snúðu “áfram/öfugt” Skiptu yfir í öfugt, the large motor of the receiver will turn on in reverse, and the display will show reverse
Snúðu “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “áfram/öfugt” Skiptu yfir í áfram, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Snúðu “Áfram/öfugt” Skiptu yfir í öfugt, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Snúðu “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Snúðu “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
Í handvirkri stillingu:
Turn left in place: Haltu inni og haltu “Enable” button, Snúðu “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Haltu inni og haltu “Enable” button, Snúðu “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Enable” hnappinn og snúðu “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Sjálfvirk skurður
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Í handvirkri stillingu, press and hold the “Enable” hnappinn og snúðu “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (Notendum er bannað að breyta því án leyfis)
Some functions of the remote control can be adjusted through parameters. Í handvirkri stillingu, when the small motor speed S2 is 10, Ýttu áfram/öfugri skiptinni þrisvar í röð, and then push it down three times in a row to enter the parameter menu;
Farðu út í færibreytuvalmyndina: choose to save or not save, then press the enable button to confirm the exit;
Hámarksstraumur: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, Sjálfgefið 800, Breyting er bönnuð;
Hraðmyndunarstærð: automatic cutting control parameter. Þegar skurðargildið er umfram þetta gildi,deceleration begins.
Hröðun A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Hraðaminnkun A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Hámarks gangandi: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Hraðamörk offset: the maximum speed of the small motor during automatic cutting.
Hámarks gestgjafi: maximum speed of large motor.
Loka túlkunarréttur þessarar vöru tilheyrir aðeins fyrirtækinu okkar.
