Nkọwa
1.Introduction of remote control
a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: electronic handwheel + receiver;
b.Characteristics
*Support Siemens PLC: S7-200/-300/-1200；Support real-time display of Siemens system coordinate values；
*The wireless transmission distance is open 40 mita, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
*The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 ụbọchị;
*The receiver is equipped with an external antenna to enhance the signal and is easy to install;
*Electronic handwheel support: one 100PPR encoder 、one 6-speed axis selection switch 、 one 3-speed magnification switch;
*Electronic handwheel supports 6 MPG AWGP ikuku XHC maka etiti CNC, corresponding to Siemens PLC address, nke enwere ike ịhazi ya n'efu;
*6 custom buttons can control 6 switch outputs;
*The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.
2.Application field
Programmable CNC remote control is widely used in various CNC fields such as laser engraving system, Igwe igwe igwe igwe CNC, CNC machining center, gantry machine tool, wdg.
3. Introduction to the working principle
1）Electronic handwheel is connected to PLC via Ethernet receiver
a.The handwheel transmits the key data wirelessly to the receiver, and the receiver writes the keys through the network cable PLC system DB area; the receiver reads the data to be displayed from the designated DB area, and then returns the data to the handwheel display screen. The user can customize the base address of reading and writing DB area on the handwheel, ka aka wee gụọ ma dee data na mpaghara DB nke PLC.
b. Onye na-anabata ya na-akwado protocol S7. Na-emetụta plc s7-200, Plc s7-300 na plc s7-1200.
c. Onye ọrụ nwere ike hazie onye na-anabata ya na ọnọdụ sava na ọnọdụ ndị ahịa site na Ngwá Ọrụ Nhazi PLC.
Na Ọnọdụ Server, Onye ọrụ na-ahazi PLC Gụọ ma dee adres site na ngwanrọ nke WGP-Ets;Jiri Ngwá Ọrụ Ntọala PLC iji hazie onye na-anabata ya na ọnọdụ ndị ahịa. Mgbe nhazi, Onye na-anabata ihe XWGP - nwere ike ikwurita okwu na PLC site na Standard S7 Protocol.
2)Ngwa ụfọdụ
Ngwa doro anya nke nnata na Siemens PLC S7-200:
a. Bọtịnụ dị na aka aka kwekọrọ na uru nke mpaghara bool setịpụrụ nke onye ọrụ na PLC. If the button of the handwheel is pressed, the corresponding BOOL area is true, and when it is released, it is false, and the base address of the BOOL area can be set through the handwheel;
b. The handwheel can read the value of the DB area in the PLC. One axis has 4 bytes of display data, and 6 axes have a total of 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.
4.Appearance introduction
5.Receiver terminal definition and coding table
6.Appearance size
