Programmable CNC Wireless Remote Control PHB06B

MK4-V

1.Pwodwi Entwodiksyon

The programmable CNC remote control PHB06B is suitable for wireless
operasyon kontwòl remote nan divès sistèm CNC. It supports users to
customize programming and develop button functions to realize remote
control of various functions on the CNC system; it supports users to
customize programming and develop display content to realize dynamic
display of system status; the remote control comes with a rechargeable
battery and supports Type-C interface charging.

2.Karakteristik pwodwi

1. Sèvi ak 433MHz teknoloji kominikasyon san fil, operasyon an san fil
Distans se 80 mèt;
2. Sèvi ak fonksyon otomatik frekans so, 32 Ansanm nan san fil aleka
contrôleur ka itilize an menm tan an san yo pa afekte youn ak lòt;
3. li ka sipòte 32pcs ekipman yo itilize an menm tan an 12 pwogramasyon bouton koutim;
4. Support 2.8-inch screen, display content custom programming;
5. li ka sipòte 32pcs ekipman yo itilize an menm tan an 1 6-speed axis selection switch, which can be custom programmed;
6. li ka sipòte 32pcs ekipman yo itilize an menm tan an 1 7-speed magnification switch, which can be custom programmed;
7. li ka sipòte 32pcs ekipman yo itilize an menm tan an 1 volan elektwonik, 100 pulses/turn;
8. Support standard Type-C charging; 5V-2A chaje spesifikasyon; battery
specification 18650/12580mWh battery.

3.Amelyore san fil manyèl batman kè dèlko handwheel pendant ZTWGP

4. Espesifikasyon pwodwi yo

5.Pwodwi Fonksyon Entwodiksyon

Nòt：
①Power switch：
Control hand wheel to open and close

②Enable buttons on both sides：
The enabling button must be pressed to crank the hand wheel;

③Custom button area
12 buttons arranged in 3X4, Itilizatè-defini pwogramasyon;

④Axis selection, magnification switch
1 6-position axis selection switch, which can be customized and programmed;
1 7-position ratio switch, which can be customized and programmed

⑤ Emergency stop switch:
Handwheel emergency stop switch;

⑥Display area:
Can display current power, signal, and customized display content;

⑦Electronic hand wheel：
1 volan elektwonik, 100 pulses/turn.

⑧Charging port:

Built-in rechargeable battery, charged using Type-C charger, Chaje vòltaj 5v,
aktyèl 1a-2a; charging time 7 èdtan;

6.Pwodwi Pwodwi pou Telefòn Dyagram

7.Gid Enstalasyon Pwodwi

1. Insert the USB receiver into the computer, òdinatè a pral otomatikman
recognize and install the USB device driver without manual installation;
2. Mete kontwòl la remote nan plato a. Apre yo fin batri a konplètman chaje, turn
on the power switch, turn on the remote control, and the display shows normal, which
means the power-on is successful;
3. Apre alimante sou, Ou ka fè nenpòt ki operasyon bouton. The remote control can
support dual button operation at the same time. Lè ou peze nenpòt ki bouton, a black
square will appear next to the signal on the remote control, indicating that the button
is valid.

8.Enstriksyon operasyon pwodwi yo
Anvan devlopman pwodwi ak itilize, you can use the Demo software we provide to test
the buttons and display of the remote control, or use the Demo as a reference routine for
future programming development;
Anvan ou itilize lojisyèl Demo a, Tanpri ploge reseptè a USB nan òdinatè a, make
sure the remote controller has sufficient power, Vire sou switch la pouvwa, Lè sa a, sèvi ak li;
Lè nenpòt ki bouton sou kontwòl la remote bourade, the test software Demo will display the
corresponding key value. After releasing it, the key value display disappears, indicating that
the button upload is normal.

9.Product Troubleshooting

10. Maintenance and care

1. Please use it in a dry environment with normal temperature and pressure to extend
the service life;
2. Do not use sharp objects to touch the key area to extend the service life of the key;
3. Please keep the key area clean to reduce key wear;
4. Avoid squeezing and falling to cause damage to the remote control;
5. If not used for a long time, please remove the battery and store the remote control and
battery in a clean and safe place;
6. Pay attention to moisture-proof during storage and transportation.

11.Safety Information

1. Please read the instructions carefully before use. Non-professionals are prohibited
from operating.
2. Please use the original charger or a charger produced by a regular manufacturer with
the same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing
the remote control to be unresponsive.
4. If repair is required, please contact the manufacturer. If the damage is caused by
self-repair, the manufacturer will not provide warranty.