ትግበራ:ለተለያዩ የኢንዱስትሪ መሣሪያዎች ያገለገሉ
1.ከፍተኛ 26 አጫጫን የወጪ ወጪዎች.
2.የግድግዳ-ነፃ የማስተላለፍ ርቀት ነው 200 ሜትር.
3. ከፍተኛ 4 የአናሎግ ሰርጦች 0-10V ውፅዓት (የማሳያ ክልል ሊበጁ ይችላል): ድጋፎች 2 የተራዘሙ የተራዘመ የዲጂታል ፖድሪሜትር ማውጫ ውፅዓት;
4. 2 አናሎግ ግብዓቶች; እና በርቀት መቆጣጠሪያ ላይ ይታያል, ማሳያው ክልል ሊበጁ ይችላሉ.
5. 1 የአስቸኳይ ጊዜ ማቆሚያ ውፅዓት በመደበኛነት የተዘጋ ግንኙነት.
ሞዴል: DH01R-4W-26K
የሚመለከታቸው መሣሪያዎች:various industrial equipment
ማስታወሻ: ከሶስት አንቴናስ ውስጥ አንዱን መምረጥ ይችላሉ. የመግቢያ ዋንጫ አንቴና በነባሪነት ደረጃ ነው.
ማስታወሻ:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.
②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.
④Analog input, ranging from 1 ለ 2, indicating that there are 1 ለ 2 አናሎግ ግብዓቶች(maximum 2 ሰርጦች); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, ወዘተ) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
1）Maximum 26 አጫጫን የወጪ ወጪዎች;
2）Maximum 4 የአናሎግ ሰርጦች 0-10V ውፅዓት (የማሳያ ክልል ሊበጁ ይችላል): ድጋፎች 2 የተራዘሙ የተራዘመ የዲጂታል ፖድሪሜትር ማውጫ ውፅዓት;
3）2 analog inputs; እና በርቀት መቆጣጠሪያ ላይ ይታያል, ማሳያው ክልል ሊበጁ ይችላሉ
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA ባትሪዎች, low power consumption design;
6） Wireless operation distance is 200 ሜትር;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.
W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)
ዝቅተኛ voltage ልቴጅ: የርቀት መቆጣጠሪያ ባትሪ በጣም ዝቅተኛ ነው, እባክዎን ባትሪውን ይተኩ.
አውታረ መረብ ወረደ: ገመድ አልባ ምልክቱ ተቋር is ል. እባክዎ ተቀባዩን ኃይል ያረጋግጡ, እንደገና አብራ, የርቀት መቆጣጠሪያውን እንደገና ያስጀምሩ.
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, የኃይል ማብሪያውን ማብራት, and the display shows a value,ስኬታማ ጅምርን የሚያመለክቱ. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
የርቀት መቆጣጠሪያዎች አንዳንድ ተግባሮች በግቤት ማሻሻያዎች ሊስተካከሉ ይችላሉ. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
ከፓኬት ምናሌው ውጣ: ለማስቀመጥ ወይም ለማዳን ይምረጡ, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 ለ 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 ለ 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 ለ 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 ለ 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
የዚህ ምርት የመጨረሻ ትርጓሜው ለድርጅታችን ብቻ ነው.
