Isilawuli kude esingenantambo se-CNC esihlelekayo PHB10

Incazelo

1.Isingeniso Somkhiqizo

The programmable CNC remote control PHB10 is suitable for wireless
Ukusebenza kokulawula okukude kwezinhlelo ezahlukahlukene ze-CNC. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Izici zomkhiqizo

1. Usebenzisa ubuchwepheshe bokuxhumana okungenantambo abangama-433mz, ukusebenza okungenantambo
ibanga liwukuthi 80 amamitha;
2.Usebenzisa umsebenzi we-othomathikhi we-hopping umsebenzi, 32 amasethi okude okungenantambo
abalawuli bangasetshenziswa ngasikhathi sinye ngaphandle kokuthintanase;
3.Ukuxhaswa 32 Ukuhlelwa Kwenkinobho Yangokwezifiso;
4.Ukuxhaswa 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5I-V-2A ishaja ukucaciswa;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.izinga lokuhluleka kwekhebula lincishisiwe

4. Ukucaciswa komkhiqizo

5.Isingeniso somsebenzi wesingeniso

Amanothi：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, Sicela ungene esikhundleni sebhethri;

②Button area：32 buttons arranged in 4X8, Uhlelo oluchazwe ngumsebenzisi;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, Ukushaja Voltage 5v, Okwamanje 1a-2a; charging
time 3-5 amahora;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Umdwebo Wezesekeli Yomkhiqizo

7.Umhlahlandlela Wokufakwa Komkhiqizo

1 . I nsert the USB receiver into the computer, Ikhompyutha izokwenza ngokuzenzakalelayo
recognize and install the USB device driver without manual
2. Faka isilawuli kude kushaja. Ngemuva kokuthi ibhethri likhokhiswe ngokuphelele, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. Ngemuva kokufaka amandla, Ungenza noma yikuphi ukusebenza kwenkinobho. The remote control
can support dual button operation at the same time. Uma ucindezela noma iyiphi inkinobho, le khasi
COMMU light on the remote control will light up, indicating that this button is valid.

8.Imiyalo yokusebenza komkhiqizo
Ngaphambi kokuthuthukiswa komkhiqizo nokusebenzisa, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Ngaphambi kokusebenzisa isoftware yedemo, Sicela uxhume isitholi se-USB kwikhompyutha,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, bese uyisebenzisa;
Lapho noma iyiphi inkinobho ekulweni okukude icindezelwa, the test software demo will display
the corresponding key value. Ngemuva kokuyikhulula, Isibonisi senani eliyisihluthulelo siyanyamalala,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.Ukuxazulula inkinga yomkhiqizo

10. Ukulungiswa nokunakekelwa

1. Sicela uyisebenzise endaweni eyomile enamazinga okushisa ajwayelekile nengcindezi yokwelula
Impilo Yenkonzo;
2. Musa ukusebenzisa izinto ezibukhali ukuthinta indawo esemqoka ukunweba impilo yensiza yokhiye;
3. Sicela ugcine indawo esemqoka ihlanzekile ukunciphisa ukugqokwa okubalulekile;
4. Gwema ukushelela nokuwela ukudala umonakalo kulawulo olukude;
5. Uma kungasetshenziswanga isikhathi eside, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Nakani ukunaka-ubufakazi ngesikhathi sokugcina nokuhamba.

11.Imininingwane Yezokuphepha

1. Sicela ufunde imiyalo ngokucophelela ngaphambi kokusebenzisa. Non-professionals are prohibited from
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Uma ukulungiswa kudingeka, Sicela uxhumane nomenzi. If the damage is caused by self-repair,
umenzi ngeke anikeze iwaranti.