可程式數控無線遙控器PHB06B

MK3-M4

 

1.產品簡介

The programmable CNC remote control PHB06B is suitable for wireless
各種CNC系統的遙控操作. It supports users to
customize programming and develop button functions to realize remote
control of various functions on the CNC system; it supports users to
customize programming and develop display content to realize dynamic
display of system status; the remote control comes with a rechargeable
battery and supports Type-C interface charging.

2.收益

1. 使用433MHz無線通信技術, 無線操作
距離是 80 米;
2. 使用自動跳躍功能, 32 無線遙控器集
控制器可以同時使用而不會互相影響;
3. 支持 12 自定義按鈕編程;
4. Support 2.8-inch screen, display content custom programming;
5. 支持 1 6-speed axis selection switch, which can be custom programmed;
6. 支持 1 7-speed magnification switch, which can be custom programmed;
7. 支持 1 電子手輪, 100 pulses/turn;
8. Support standard Type-C charging; 5V-2A充電規範; battery
specification 18650/12580mWh battery.

3.操作更方便

4. 產品規格

5.產品功能簡介

筆記：
①Power switch：
Control hand wheel to open and close

②Enable buttons on both sides：
The enabling button must be pressed to crank the hand wheel;

③Custom button area
12 buttons arranged in 3X4, 用戶定義的編程;

④Axis selection, magnification switch
1 6-position axis selection switch, which can be customized and programmed;
1 7-position ratio switch, which can be customized and programmed

⑤ Emergency stop switch:
Handwheel emergency stop switch;

⑥Display area:
Can display current power, signal, and customized display content;

⑦Electronic hand wheel：
1 電子手輪, 100 pulses/turn.

⑧Charging port:

Built-in rechargeable battery, charged using Type-C charger, 充電電壓5V,
當前的1a-2a; charging time 7 小時;

6.產品配件圖

7.產品安裝指南

1. Insert the USB receiver into the computer, 計算機將自動
recognize and install the USB device driver without manual installation;
2. 將遙控器插入充電器. 電池充滿電後, turn
on the power switch, turn on the remote control, and the display shows normal, which
means the power-on is successful;
3. 電源後, 您可以執行任何按鈕操作. The remote control can
support dual button operation at the same time. 當您按任何按鈕時, a black
square will appear next to the signal on the remote control, indicating that the button
is valid.

8.產品操作說明
產品開發和使用之前, you can use the Demo software we provide to test
the buttons and display of the remote control, or use the Demo as a reference routine for
future programming development;
在使用演示軟件之前, 請將USB接收器插入計算機, make
sure the remote controller has sufficient power, 打開電源開關, 然後使用它;
按下遙控器上的任何按鈕, the test software Demo will display the
corresponding key value. 發布後, 鑰匙值顯示消失, indicating that
the button upload is normal.

 

9.產品故障排除

 

10. 維護和關懷

1. 請在正常溫度和壓力的干燥環境中使用它以延長
服務壽命;
2. 請勿使用鋒利的物體觸摸關鍵區域以延長鑰匙的使用壽命;
3. 請保持關鍵區域清潔以減少鑰匙磨損;
4. 避免擠壓和下降以損害遙控器;
5. 如果很長一段時間沒有使用, please remove the battery and store the remote control and
battery in a clean and safe place;
6. 在存儲和運輸過程中註意耐水性.

11.安全信息

1. 請在使用前仔細閱讀說明. Non-professionals are prohibited
from operating.
2. Please use the original charger or a charger produced by a regular manufacturer with
the same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing
the remote control to be unresponsive.
4. 如果需要維修, 請聯繫製造商. If the damage is caused by
self-repair, 製造商將不提供保修.