Dasturlashtiriladigan CNC simsiz masofadan boshqarish pulti PHB10

Tavsif

1.Mahsulotni tanishtirish

The programmable CNC remote control PHB10 is suitable for wireless
CNC tizimlarining masofadan boshqarish pulti. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Mahsulot xususiyatlari

1. 433mhz simsiz aloqa texnologiyasidan foydalanish, simsiz operatsiya
masofa 80 metr;
2.Avtomatik chastotalarni ishga tushirish funktsiyasidan foydalanish, 32 simsiz masofadan turib
kontrollerlar bir-biriga ta'sir qilmasdan bir vaqtning o'zida ishlatilishi mumkin;
3.Payvandlash mashinasini avtomatlashtirish payvandlash va payvandlash operatori. Turn Rolls 1. Chastotani sakrashli uzatish texnologiyasidan foydalanish 32 Shaxsiy tugmachani dasturlash;
4.Payvandlash mashinasini avtomatlashtirish payvandlash va payvandlash operatori. Turn Rolls 1. Chastotani sakrashli uzatish texnologiyasidan foydalanish 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5V-2A zaryadlash spetsifikatsiyasi;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.Simsiz uzatish texnologiyasidan foydalanish

4. Mahsulot xususiyatlari

5.Mahsulot funktsiyasi Kirish

Qaydlar：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, Iltimos batareyani almashtiring;

②Button area：32 buttons arranged in 4X8, Foydalanuvchi tomonidan belgilangan dasturlash;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, Voltaj 5V, Hozirgi 1a-2a; charging
time 3-5 soat;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Mahsulot uchun aksessuarlar diagrammasi

7.Mahsulotni o'rnatish bo'yicha qo'llanma

1 . I nsert the USB receiver into the computer, Kompyuter avtomatik ravishda amalga oshiriladi
recognize and install the USB device driver without manual
2. Masofadan boshqarish pultini zaryadlovchiga joylashtiring. Batareya to'liq zaryadlangandan so'ng, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. Yoqilganidan keyin, Siz har qanday tugmani amalga oshirishingiz mumkin. The remote control
can support dual button operation at the same time. Har qanday tugmani bosganingizda, bu
COMMU light on the remote control will light up, indicating that this button is valid.

8.Mahsulotni ishlatish bo'yicha ko'rsatmalar
Before product development and use, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Before using the Demo software, please plug the USB receiver into the computer,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, and then use it;
When any button on the remote control is pressed, the test software demo will display
the corresponding key value. After releasing it, the key value display disappears,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.Mahsulotni bartaraf etish

10. Ta'minot va parvarish qilish

1. Please use it in a dry environment with normal temperature and pressure to extend
the service life;
2. Do not use sharp objects to touch the key area to extend the service life of the key;
3. Iltimos, kalit kiyimni kamaytirish uchun kalit maydonini toza tuting;
4. Masofadan boshqarish pultiga zarar etkazish uchun siqish va yiqilishdan saqlaning;
5. Agar uzoq vaqt ishlatilmasa, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Saqlash va tashish paytida namlik isbotlariga e'tibor bering.

11.Xavfsizlik haqida ma'lumot

1. Foydalanishdan oldin ko'rsatmalarni diqqat bilan o'qing. Non-professionals are prohibited from
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Agar ta'mirlash talab qilinsa, Iltimos, ishlab chiqaruvchi bilan bog'laning. If the damage is caused by self-repair,
Ishlab chiqaruvchi kafolat bermaydi.