Paglalarawan
1.Product model
Modelo: DH01R-4W-26K
Applicable equipment:various industrial equipment
2.Product accessories diagram
Tandaan: You can choose one of the three antennas. The suction cup antenna is standard by default.
3.Product model description
Tandaan:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, ibig sabihin walang emergency stop output.
②Kung walang analog na output, hindi na kailangang bigyang-pansin ang 0W o 0R; ang mga analogquantity W1, W2, W3, at W4 ang default sa 0-10V analog na boltahe na output; sabay sabay, Ang W1 at W2 ay maaaring palawakin sa 2 nakahiwalay na mga digital na potentiometer na output, na may hanay ng 0 -5K ohms, ½ watt; resolusyon: 20 ohms. Ang dalawang digital na potensyal ay maaaring gamitin upang kontrolin ang welding current at welding voltage ng welding machine. Kung kinakailangan ang output ng digital potentiometer, ang mga tala ng gumagamit ay kinakailangan.
④Analog input, mula sa 1 sa 2, na nagpapahiwatig na mayroong 1 sa 2 mga analog input(maximum 2 mga channel); kapag may analog input, kailangan mong tandaan ang hanay ng boltahe ng analog input (ang aming receiver ay default sa 0 -5Angkop para sa Mach3 lahat ng motion control system, ang gumagamit ay maaari ring tandaan bilang 4-20 mA o 0-10V, Nakaraang) at ang kaukulang hanay ng pagpapakita ng dami ng analog (Halimbawa: display 0-100 volts o 0-1000 amps)
Ang dalawang analog na dami ay maaaring gamitin bilang mga display para sa kasalukuyang hinang at boltahe ng hinang.
4.Mga Tampok
1）Maximum 26 Welding machine automation welding at welding operator.Turn Rolls 1.Using frequency hopping transmission technology;
2）Maximum 4 mga channel ng analog na 0-10V na output (maaaring i-customize ang hanay ng display): sumusuporta 2 mga channel ng pinalawig na nakahiwalay na digital na potentiometer na output;
3）2 analog inputs; at ipinapakita sa remote control, maaaring i-customize ang hanay ng display
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Mga baterya ng AA, low power consumption design;
6） Wireless operation distance is 200 metro;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.
5.Remote control switch description
6.Display content introduction
W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)
Low voltage: The remote control battery is too low, please replace the battery.
Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.
7.Remote control function operation instructions
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 sa 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 sa 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 sa 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 sa 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
8.Remote control electrical characteristics
9.Remote control size
The final interpretation right of this product belongs only to our company.
