Дастгоҳи бесими дастӣ DWGP

Тасвирӣ

1.Муқаддима

Wireless electronic handwheel is used for manual guidance, ҷойгузин, tool setting and
other operations of CNC machine tools. Ин маҳсулот технологияи интиқоли бесимро қабул мекунад,
eliminating the traditional spring wire connection, Кам кардани камбудиҳои таҷҳизоте, ки тавассути кабелҳо ба вуҷуд омадааст,
eliminating the disadvantages of cable dragging, oil stains, ғайра., and is more convenient to
operate. It is widely used in CNC machine tools such as gantry machining centers, gantry
vertical lathes, CNC gear processing machines, and can be adapted to a variety of CNC
systems on the market, монанди siemens, Mitsubishi, Fanuc, syntec and other CNC system
brands.

2.Хусусиятҳои маҳсулот

1. 433mhz технологияи бесими алоқамандро қабул кунед, Масофаи кори бесим аст 80 метр;
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the
same time without affecting each other;
3. Дастгирии тугмаи фавқулодда, and after the handwheel is turned off, the emergency stop
button is still valid;
4. Ёрӣ расондан 6 Тугмаҳои фармоишӣ, Гузариши сигнали IO;
5. Дастгирии назорати 6-меҳвар, 7-12 Назорати меҳвар метавонад фармоишӣ бошад;
6. 1x дастгирӣ мекунад,10Х, 100X Назорат ва метавонад ҳадди аксар фармоишӣ 1000x;
7. Supports the enable button function, output switch l0 sianals. Интихоби Сурай,maanification
and encoder.;
8. Support axis selection and magnification selection encoder output;
9. Support standard Type-C charging, 5V-2A charging specification, built-in battery specification
14500/1100mAh.

3.Тавсифоти маҳсулот

4.Product function introduction

Киштиҳо：
①Emergency stop button：
When the emergency stop button is pressed, the two emergency stop IO outputs on
the receiver are disconnected, and all handwheel functions are invalid. When the emergency
stop is released, the emergency stop IO output on the receiver is closed, and all handwheel
functions are restored; and after the handwheel is turned off, the emergency stop IO output
of the receiver is still valid when the emergency stop button is pressed.

②Enable button:
Press any one of the enable buttons on both sides, and the two groups of enable IO
outputs on the receiver will be turned on. Release the enable button and the enable IO
output will be turned off. Дар Илова, you need to press and hold the enable button before
switching the axis selection ratio and shaking the handwheel. This function can be
canceled through the configuration software.
③Axis selection switch (Гузариши барқ):
Press and hold the enable button and switch the axis selection switch to switch the
moving axis controlled by the handwheel. Switch this switch from OFF to any axis and
turn on the handwheel power.

④Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.

⑤Battery indicator:
The hand wheel power display, all bright means full power, all off means it is not
turned on or has no power, the first left grid flashes, indicating that the power is too low,
please charge in time.
⑥Signal Lights:
If the signal light is on, it means the handwheel is being operated and the signal is
normal; if the signal light is off, it means there is no operation, or it is being operated but
the wireless signal is not connected.

5.Product accessories diagram

6.Дастури насбкунии маҳсулот

6.1 Product Installation Steps
1. Install the receiver in the electrical cabinet using the clips on the back, or install it in
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Refer to our receiver wiring diagram, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3.After the receiver is fixed, Антенна бо қабулкунанда муҷаҳҳаз карда шудааст,
and the outer end of the antenna must be installed or placed outside the electrical cabinet. It
is recommended to place it on the top of the electrical cabinet for the best signal effect. It is
forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4. Дар охир, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 Андозагирии қабулкунандаро

6.3 Қабулкунанда

7.Product Operation Instructions
1. The machine is powered on, the receiver is powered on, the receiver working indicator
light flashes, the wireless electronic handwheel has the battery installed, the battery cover
is fastened, the wireless electronic handwheel power switch is turned on, and the
handwheel power light is on;
2. Козисро интихоб кунед: Тугмаи Фондро пахш кунед ва нигоҳ доред, switch the axis selection
switch, and select the axis you want to operate on;
3. Бовар кунед: Тугмаи Фондро пахш кунед ва нигоҳ доред, switch the magnification switch,
and select the magnification level you need;
4. Тринги ҳаракат: Тугмаи Фондро пахш кунед ва нигоҳ доред, Гузариши интихоби меҳварро интихоб кунед, select
the magnification switch, and then rotatethe pulse encoder to rotate the positive moving axis
clockwise and the negative moving axis counterclockwise;
5. Тугмаи фармоиширо пахш кунед ва доред, and the corresponding button IO output of the
receiver will be turned on. Release the button to turn off the output;
6. Press the emergency stop button, the corresponding emergency stop IO output of the
receiver is disconnected, the handwheel function is disabled, release the emergency stop
button, the emergency stop IO output is closed, and the handwheel function is restored;
7. Агар даста барои муддати як вақт кор накунад, it will automatically enter sleep
mode to reduce power consumption. Вақте ки он боз истифода мешавад, the handwheel can be
activated by pressing the enable button;
8. Агар даст дар муддати тӯлонӣ истифода нашавад,it is recommended to switch the handwheel
shaft to the OFF position, Қудрати дастиро хомӯш кунед, Ва батареяро дароз кунед.

8.Тасвири намунавии маҳсулот

① ：DWGP represents the appearance style

② ：Параметрҳои баровардашуда:
01: Indicates that the pulse output signals are A and B, and the pulse voltage is 5V; Pulse
quantity 100PPR;
02: Indicates that the pulse output signals are A and B, and the pulse voltage is 12V; Pulse
quantity 25PPR;
03: Indicates that the pulse output signal is A B、A-、B-； Шиддати пулии Пул; Pulse quantity 1
00PPR;
04: Натиҷаи НАЗИ НАВИ НАВИ НАВИ НАВ, бо аломатҳои баромади Pulse A ва B; the
number of pulses is 100PPR;05: Нишони баровардани SNP-ро нишон медиҳад, pulse output signals
are A and B; pulse quantity is 100PPR;
③ : represents the number of axis selection switches, 6 ифода мекунад 6 меҳвар, 7 ифода мекунад 7 меҳвар.
④ : represents the type of axis selection switch signal, Як сигнали баромади нуқта,
B represents encoded output signal;

⑤ : represents the type of magnification switch signal,
Як сигнали баромади нуқта, B represents encoded output signal;
⑥ : represents the number of custom buttons, 6 ифода мекунад 6 Тугмаҳои фармоишӣ;
⑦ : represents the power supply for the system handwheel, 05 таъминоти 5V-ро ташкил медиҳад,
ва 24 represents 24V power supply.

9.Product Troubleshooting

10. Maintenance and care

1. Лутфан онро дар муҳити хушк дар ҳарорати хонагӣ ва фишор барои дароз кардани мӯҳлати хидматаш истифода баред;
2. Лутфан бо истифода аз муҳити ғайримуқаррарӣ, ба монанди борон ва футури об барои васеъ кардани мӯҳлати хизмат;
3. Лутфан пайдоиши дастро тоза кунед, то сатҳи хизмати худро васеъ кунад;
4. Лутфан аз фишурдани фишурда нашавед, афтидан, задан, ғайра. to prevent damage to the precision components inside
the handwheel or accuracy errors;
5. Агар муддати дароз истифода нашавад, Лутфан дар ҷои тоза ва бехатар нигоҳ доред;
6.Ҳангоми нигоҳдорӣ ва интиқол, диққат бояд ба намӣ ва муқовимати шок дода шавад.

11.Маълумоти бехатарӣ

1. Лутфан дастурҳоро бодиққат пеш аз истифода ва манъ кардани мутахассисон аз кор таъмин кунед;
2. When the battery level is too low, please charge it in time to avoid errors caused by insufficient
battery and inability to operate the handwheel;

3. Агар таъмир бошад, Лутфан бо истеҳсолкунанда тамос гиред. Агар зиёне, ки бо таъмири худ ба вуҷуд меояд, истеҳсолкунанда кафолат намедиҳад.