Udhibiti wa kijijini usiotumia waya wa viwandani DH01R-4W-26K

Maombi:used for various industrial equipment

1.Maximum 26 Ulehemu wa otomatiki wa mashine ya kulehemu na mwendeshaji wa kulehemu.Turn Rolls 1.Kutumia teknolojia ya uambukizaji wa frequency hopping.

2.Umbali wa maambukizi bila kizuizi ni 200 mita.

3. Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 njia ya kupanuliwa pekee digital potentiometer pato;

4. 2 analog inputs; na kuonyeshwa kwenye kidhibiti cha mbali, safu ya kuonyesha inaweza kubinafsishwa.

5. 1 emergency stop relay output normally closed contact.

Ubunifu wa matumizi ya nguvu ya chini
Rahisi kutumia

Maelezo

1.Product model

Mfano: DH01R-4W-26K

Applicable equipment:various industrial equipment

2.Product accessories diagram

Kumbuka: You can choose one of the three antennas. The suction cup antenna is standard by default.

3.Product model description

Kumbuka:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 analog inputs(maximum 2 njia); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5MK3-ET, the user can also note as 4-20 mA or 0-10V, na kadhalika.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Vipengele

1）Maximum 26 Ulehemu wa otomatiki wa mashine ya kulehemu na mwendeshaji wa kulehemu.Turn Rolls 1.Kutumia teknolojia ya uambukizaji wa frequency hopping;
2）Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 njia ya kupanuliwa pekee digital potentiometer pato;
3）2 analog inputs; na kuonyeshwa kwenye kidhibiti cha mbali, safu ya kuonyesha inaweza kubinafsishwa
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Betri za AA, muundo wa matumizi ya chini ya nguvu;
6） Wireless operation distance is 200 mita;
7）Protection grade IP67;
8）With cross switch operation, inasaidia swichi mbili za msalaba zenye mwelekeo 4;
9）Back strap design.

5.Maelezo ya kubadili udhibiti wa mbali

6.Onyesha utangulizi wa maudhui

thamani ya W1: W1: 0-1000 (parameta inayoweza kubadilishwa 0-9999)
W2 knob value: W2: 0-5000 (parameta inayoweza kubadilishwa 0-9999)
W3 knob value: W3: 0-5000 (parameta inayoweza kubadilishwa 0-9999)
W4 knob value: W4: 0-5000 (parameta inayoweza kubadilishwa 0-9999)
ADC1 feedback display: 0-1000 (parameta inayoweza kubadilishwa 0-5000)
ADC2 feedback display: 0-1000 (parameta inayoweza kubadilishwa 0-5000)

Low voltage: The remote control battery is too low, please replace the battery.

Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.

7.Remote control function operation instructions

1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Zungusha visu katika W1-W4 kiholela ili kuendesha mawimbi ya pato ya analogi inayolingana au ishara ya potentiometa kwenye ncha ya kipokezi.. Ishara ya pato la analogi kwenye mwisho wa mpokeaji hubadilika kwa ishara ya voltage 0-10V, na ishara ya potentiometer inabadilika kuwa 0-5K;
4） Kitendaji cha kusimamisha dharura
Wakati kitufe cha kuacha dharura kinapobofya, matokeo yote ya mawimbi yamekatwa na pato la analogi limekatishwa; baada ya kuacha dharura kutolewa, ishara zote za kubadili zinarejeshwa na matokeo ya analog yanarejeshwa; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 to 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 to 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;