kadali jauh nirkabel Industrial DH01R-4W-26K

Aplikasi:used for various industrial equipment

1.Maximum 26 las automation mesin las sarta operator las.Turn Rolls 1.Using frékuénsi hopping téhnologi transmisi.

2.Jarak transmisi bébas panghalang téh 200 méter.

3. Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;

4. 2 analog inputs; and displayed on the remote control, the display range can be customized.

5. 1 emergency stop relay output normally closed contact.

Desain konsumsi kakuatan low
Gampang dianggo

Katerangan

1.Product model

Modél: DH01R-4W-26K

Applicable equipment:various industrial equipment

2.Product accessories diagram

Catetan: You can choose one of the three antennas. The suction cup antenna is standard by default.

3.Product model description

Catetan:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, eta hartina tanpa kaluaran eureun darurat.

②Upami teu aya kaluaran analog, teu kedah nyarios 0W atanapi 0R; jumlah analog W1, W2, W3, sarta W4 standar pikeun 0-10V kaluaran tegangan analog; dina waktos anu sasarengan, W1 jeung W2 bisa dilegakeun ka 2 kaluaran potentiometer digital terasing, kalawan rentang 0 -5K ohm, ½ watt; resolusi: 20 ohm. Dua poténsi digital tiasa dianggo pikeun ngontrol arus las sareng tegangan las tina mesin las. Upami kaluaran potentiometer digital diperyogikeun, catetan pamaké diperlukeun.

④Asup analog, mimitian ti 1 ka 2, indicating that there are 1 ka 2 analog inputs(maximum 2 saluran); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5Lengkah band switch jeung mouse, the user can also note as 4-20 mA or 0-10V, jsb.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Fitur

1）Maximum 26 las automation mesin las sarta operator las.Turn Rolls 1.Using frékuénsi hopping téhnologi transmisi;
2）Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
3）2 analog inputs; and displayed on the remote control, the display range can be customized
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Batré AA, low power consumption design;
6） Wireless operation distance is 200 méter;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Remote control switch description

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
nilai kenop W2: W2: 0-5000 (parameter adjustable 0-9999)
nilai kenop W3: W3: 0-5000 (parameter adjustable 0-9999)
nilai kenop W4: W4: 0-5000 (parameter adjustable 0-9999)
tampilan eupan balik ADC1: 0-1000 (parameter adjustable 0-5000)
tampilan eupan balik ADC2: 0-1000 (parameter adjustable 0-5000)

tegangan low: Batré kadali jauh lemah teuing, mangga gentos batréna.

Jaringan turun: Sinyal nirkabel diganggu. Mangga parios kakuatan panarima, hurungkeun deui, jeung balikan deui kadali jauh.

7.parentah operasi fungsi kadali jauh

1） Hurungkeun kadali jauh
Nalika panarima dihurungkeun, indikator gawé panarima flashes; install dua accu AA dina kadali jauh, ngahurungkeun switch kakuatan, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 ka 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 ka 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 ka 9999;
F4W4 range: Nilai rentang tampilan tina kenop W4 dina layar tampilan, adjustable from 0 ka 9999
rentang F5A1: Témbongkeun ADC1 eupan balik nilai rentang tampilan, 0-5000 adjustable;
rentang F6A2: Témbongkeun ADC2 eupan balik nilai rentang tampilan, 0-5000 adjustable;
Alarem ayeuna: Setel nilai alarem pikeun tampilan eupan balik ADC1 jeung ADC2. Nalika ADC1 na ADC2 ngaleuwihan nilai ieu, tampilan kadali jauh bakal alarem; lamun nilai ieu 0, fungsi alarem teu valid;