Sharaxaada
1.Introduction of remote control
a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: Qalabka elektaroonigga ah + receiver;
b.Characteristics
*Taageerada Siemens PLC: S7-200/-300/-1200；Taageer soo bandhigida wakhtiga-dhabta ah ee nidaamka Siemens ee isku xidhka qiyamka；
*Fogaanta gudbinta wirelessku way furan tahay 40 mitir, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
*The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 maalmo;
*The receiver is equipped with an external antenna to enhance the signal and is easy to install;
*Electronic handwheel support: hal 100PPR codeer 、hal 6-xawaaraha doorashada dhidibka 、 hal 3-xawaaraha weyneynta;
*Electronic handwheel supports 6 badhamada gaarka ah, corresponding to Siemens PLC address, Kaas oo si xor ah loo barnaamijin karo;
*6 badhamada gaarka ah ayaa xakameyn kara 6 beddelo wax soo saarka;
*The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.
2.Application field
Programmable CNC remote control is widely used in various CNC fields such as laser engraving system, Mashiinka dhagaxa cnc, Xarunta farsamada CNCC, gantry machine tool, iwm.
3. Introduction to the working principle
1）Electronic handwheel is connected to PLC via Ethernet receiver
a.The handwheel transmits the key data wirelessly to the receiver, and the receiver writes the keys through the network cable PLC system DB area; the receiver reads the data to be displayed from the designated DB area, and then returns the data to the handwheel display screen. The user can customize the base address of reading and writing DB area on the handwheel, so that the handwheel can read and write the data in the DB area of the PLC.
b. The receiver supports Siemens S7 protocol. Applies to PLC S7-200, PLC S7-300 and PLC S7-1200.
j. Isticmaalaha ayaa ku habeyn kara qaataha qaataha qaabka server-ka iyo habka macmiilka iyada oo loo marayo Qalabka Isku-xirka ee PLC.
Qaabka server-ka, Isticmaalaha ayaa dejinaya PLC inuu akhriyo oo ku qor cinwaanka iyada oo loo marayo barnaamijyada qaabeynta WGP-ETS;U adeegso Qalabka Isku-xirka Isku-xirka 'PLC' si loo habeeyo qaataha qaataha habka macmiilka. Kadib qaabeynta, Qaataha Xwg-ETS wuxuu la xiriiri karaa PLC iyada oo loo marayo PLC-da Standard Protocol.
2)Codsi gaar ah
Codsi gaar ah oo ah qaataha gacanta iyo Siemens Plc S7-200:
a. Badhanka ku yaal gacanta gacanta ayaa u dhigma qiimaha aagga boobka uu adeegsanayo isticmaaleha Plc. Haddii badhanka gacanta lagu riixo, Aagga u dhigma ee u dhigma waa run, Iyo markii la sii daayo, Waa been, cinwaanka saldhigga aagga boobka waxaa lagu dejin karaa gacanta gacanta;
b. Gacanta gacanta ayaa akhrin kartaa qiimaha aagga DB ee Plc. Hal axis ayaa leh 4 barkadaha xogta shaashadda, iyo 6 faasasku waxay leeyihiin wadarta 24 bambades. Cinwaanka saldhiga ee aagga DB waxaa lagu dejin karaa barnaamijyada qaabeynta WGP-ETS.
4.Hordhac Hordhac
5.Qeexitaanka Tartanka ee Tartanka iyo Miiska Dooda
6.Cabbirka muuqaalka
