Wireless Electronic Handwheel Dwgp

Tsananguro

 

1.Chigadzirwa Chekutanga

Wireless electronic handwheel is used for manual guidance, chinzvimbo, tool setting and
other operations of CNC machine tools. Ichi chigadzirwa chinotora Wireless Wireless turnation tekinoroji,
eliminating the traditional spring wire connection, kuderedza zvishandiso kukundikana kunokonzerwa nemabhuru,
eliminating the disadvantages of cable dragging, oil stains, etc., and is more convenient to
operate. It is widely used in CNC machine tools such as gantry machining centers, gantry
vertical lathes, CNC gear processing machines, and can be adapted to a variety of CNC
systems on the market, senge mambokadzi, Mitsubishi, FANUC, syntec and other CNC system
brands.

2.Zvigadzirwa zvechigadzirwa

1. Tora 433MHz waya isina kutaurirana tekinoroji, Wireless Operation Inoshanda iri 80 metres;
2. Anotora otomatiki frequency hope yekushandisa basa, shandisa 32 sets of wireless remote controllers at the
same time without affecting each other;
3. Tsigira Emergency Stop bhatani, and after the handwheel is turned off, the emergency stop
button is still valid;
4. Tsigiro 6 Tsika mabhatani, switch io signal kubuda;
5. Tsigira 6-axis kutonga, 7-12 Axis kutonga kunogona kugadziriswa;
6. Zvinotsigira 1x,10X, 100X Kudzora uye inogona kuve yakakwana isingaenzaniswi 1000x;
7. Supports the enable button function, output switch l0 sianals. Axis kusarudzwa,maanification
and encoder.;
8. Support axis selection and magnification selection encoder output;
9. Support standard Type-C charging, 5V-2A Kubhadharisa Kufunga, built-in battery specification
14500/1100mAh.

3.Zvigadzirwa Zvinyorwa

 

4.Chigadzirwa Basa Sumo

 

Zvinyorwa：
①Emergency stop button：
When the emergency stop button is pressed, the two emergency stop IO outputs on
the receiver are disconnected, and all handwheel functions are invalid. When the emergency
stop is released, the emergency stop IO output on the receiver is closed, and all handwheel
functions are restored; and after the handwheel is turned off, the emergency stop IO output
of the receiver is still valid when the emergency stop button is pressed.

②Enable button:
Press any one of the enable buttons on both sides, and the two groups of enable IO
outputs on the receiver will be turned on. Release the enable button and the enable IO
output will be turned off. In addition, you need to press and hold the enable button before
switching the axis selection ratio and shaking the handwheel. This function can be
canceled through the configuration software.
③Axis selection switch (Switch Switch):
Press and hold the enable button and switch the axis selection switch to switch the
moving axis controlled by the handwheel. Switch this switch from OFF to any axis and
turn on the handwheel power.

④Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.

⑤Battery indicator:
The hand wheel power display, all bright means full power, all off means it is not
turned on or has no power, the first left grid flashes, indicating that the power is too low,
please charge in time.
⑥Signal Lights:
If the signal light is on, it means the handwheel is being operated and the signal is
normal; if the signal light is off, it means there is no operation, or it is being operated but
the wireless signal is not connected.

5.Zvigadzirwa zviyero Diagram

 

6.Chigadzirwa Kuisa Nhungamiro

6.1 Chigadzirwa kuisirwa matanho
1. Install the receiver in the electrical cabinet using the clips on the back, or install it in
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Tarisa kune yedu yekugamuchira Wiring Diagram, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3.Mushure mekunge mugamuchire akagadziriswa, Iyo Antenna yakashongedzwa neanogamuchira inofanira kubatana,
uye kupera kwekunze kweAntenna kunofanirwa kuiswa kana kuiswa kunze kwekabati yemagetsi. It
is recommended to place it on the top of the electrical cabinet for the best signal effect. It is
forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4. Pakupedzisira, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 Receiver kuisirwa zviyero

6.3 Receiver Wiring Reference Diagram

7.Chigadzirwa Chigadzirwa Mirayiridzo
1. The machine is powered on, the receiver is powered on, the receiver working indicator
light flashes, the wireless electronic handwheel has the battery installed, the battery cover
is fastened, the wireless electronic handwheel power switch is turned on, uye
handwheel power light is on;
2. Sarudza iyo kuronga axis: Dzvanya uye Bata Bhatani bhatani, switch the axis selection
switch, and select the axis you want to operate on;
3. Sarudza Kukura: Dzvanya uye Bata Bhatani bhatani, switch the magnification switch,
and select the magnification level you need;
4. Kufambisa axis: Dzvanya uye Bata Bhatani bhatani, Sarudza iyo axis sarudzo switch, sarudza
the magnification switch, and then rotatethe pulse encoder to rotate the positive moving axis
clockwise and the negative moving axis counterclockwise;
5. Dzvanya uye bata chero imwe chete bhatani, and the corresponding button IO output of the
receiver will be turned on. Release the button to turn off the output;
6. Dzvanya bhatani reMergency Stop, the corresponding emergency stop IO output of the
receiver is disconnected, the handwheel function is disabled, release the emergency stop
bhatani, the emergency stop IO output is closed, and the handwheel function is restored;
7. Kana iyo handwheel isingashande kwenguva yakati rebei, it will automatically enter sleep
mode to reduce power consumption. Kana ichishandiswa zvakare, the handwheel can be
activated by pressing the enable button;
8. Kana iyo ruoko ruoko haina kushandiswa kwenguva yakareba,it is recommended to switch the handwheel
shaft to the OFF position, dzima simba remaoko, uye wedzera hupenyu hwebhatiri.

8.Chigadzirwa Model Tsananguro

① ：DWGP represents the appearance style

② ：Pulse inobuda paramita:
01: Indicates that the pulse output signals are A and B, and the pulse voltage is 5V; Pulse
quantity 100PPR;
02: Indicates that the pulse output signals are A and B, and the pulse voltage is 12V; Pulse
quantity 25PPR;
03: Indicates that the pulse output signal is A B、A-、B-； Pulse voltage 5v; Pulse quantity 1
00PPR;
04: Inoratidza yakaderera-level NPN yakavhura dunhu redunhu, ne pulse inobuda masaini yeA uye B; the the
number of pulses is 100PPR;05: Inoratidza yakakwira-level pnp sosi yekubuda, pulse output signals
are A and B; pulse quantity is 100PPR;
③ : represents the number of axis selection switches, 6 inomiririra 6 axis, 7 inomiririra 7 axis.
④ : represents the type of axis selection switch signal, Inomiririra point-kune-point kubuda chiratidzo,
B represents encoded output signal;

⑤ : represents the type of magnification switch signal,
Inomiririra point-kune-point kubuda chiratidzo, B represents encoded output signal;
⑥ : represents the number of custom buttons, 6 inomiririra 6 Tsika mabhatani;
⑦ : represents the power supply for the system handwheel, 05 inomiririra 5v Power Supply,
uye 24 represents 24V power supply.

9.Chigadzirwa Dambudziko

 

10. Kuchengetedza nekutarisira

1. Ndokumbirawo uishandise munzvimbo yakaoma pamhepo tembiricha uye kumanikidzwa kuti uwedzere hupenyu hwebasa;
2. Ndokumbirawo udzivise kushandisa munzvimbo dzisina kujairika dzakadai semvura uye nemabhuru emvura kuti uwedzere hupenyu hwebasa;
3. Ndapota chengetedza kutaridzika kweiyo ruoko rwakaipa kuti uwedzere hupenyu hwayo hwebasa;
4. Ndokumbirawo kuti udzivise kunyura, kudonha, kuputika, etc. to prevent damage to the precision components inside
the handwheel or accuracy errors;
5. Kana isina kushandiswa kwenguva yakareba, Ndokumbirawo mudura ruoko rwakaipa munzvimbo yakachena uye yakachengeteka;
6.Panguva yekuchengetedza uye yekufambisa, kutariswa kunofanirwa kubhadharwa kune unyoro uye kushamisika kuramba.

11.Ruzivo rwekuchengetedza

1. Ndokumbirawo kuti muverenge iyo mirairo nokungwarira usati washandisa uye kurambidza vasingatomborambidza nyanzvi kubva pakushanda;
2. When the battery level is too low, please charge it in time to avoid errors caused by insufficient
battery and inability to operate the handwheel;

3. Kana kugadziriswa kunodiwa, Ndokumbira ubate Mugadziri. Kana kukuvara kwacho kuchikonzerwa nekuzvigadzirira, Mugadziri haazope waranti.