Tsanangudzo
1.Product model
Model: DH01R-4W-26K
Applicable equipment:various industrial equipment
2.Product accessories diagram
Cherechedza: You can choose one of the three antennas. The suction cup antenna is standard by default.
3.Product model description
Cherechedza:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, zvinoreva pasina emergency stop output.
②Kana pasina analogi inobuda, hapana chikonzero chekutaura 0W kana 0R; iwo analoquantities W1, W2, W3, uye W4 default kune 0-10V analog voltage kubuda; panguva imwe, W1 uye W2 inogona kuwedzerwa kusvika 2 isolated digital potentiometer kubuda, nehuwandu hwe 0 -5K ohms, ½ watt; resolution: 20 ohms. Iwo maviri madhijitari anokwanisa anogona kushandiswa kudzora welding ikozvino uye welding voltage yemuchina wewelding. Kana iyo digital potentiometer inobuda inodiwa, manotsi emushandisi anodiwa.
④Analogi yekupinda, kubva 1 ku 2, indicating that there are 1 ku 2 analog inputs(maximum 2 channels); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5Microsoft Windows, the user can also note as 4-20 mA or 0-10V, etc.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
4.Zvimiro
1）Maximum 26 Welding machine automation welding and welding operator.Turn Rolls 1.Kushandisa frequency hopping transmission technology;
2）Maximum 4 chiteshi cheanalog 0-10V kubuda (ratidziro yemhando inogona kugadzirwa): inotsigira 2 chiteshi chekuwedzera chakasarudzika dhijitari potentiometer kubuda;
3）2 analog inputs; uye inoratidzwa pane remote control, ratidziro yemhando inogona kugadzirwa
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA mabhatiri, yakaderera simba rekushandisa dhizaini;
6） Wireless operation distance is 200 mamita;
7）Protection grade IP67;
8）With cross switch operation, inotsigira maviri 4-direction cross switch;
9）Back strap design.
5.Remote control switch tsananguro
6.Ratidza nhanganyaya yezvirimo
W1 knob kukosha: W1: 0-1000 (parameter inogadziriswa 0-9999)
W2 knob value: W2: 0-5000 (parameter inogadziriswa 0-9999)
W3 knob value: W3: 0-5000 (parameter inogadziriswa 0-9999)
W4 knob value: W4: 0-5000 (parameter inogadziriswa 0-9999)
ADC1 feedback display: 0-1000 (parameter inogadziriswa 0-5000)
ADC2 feedback display: 0-1000 (parameter inogadziriswa 0-5000)
Low voltage: The remote control battery is too low, please replace the battery.
Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.
7.Remote control function operation instructions
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A uye K9-B kiyi yekupeji kuburikidza nemenyu uye sarudza ma paramita; bata pasi K1-A, wobva wadzvanya bhatani reK9-A/B kugadzirisa ma parameter;
Buda iyo parameter menyu: sarudza kuchengeta kana kusachengeta, wobva wadzvanya bhatani reK1-A kuratidza kubuda;
F1W1 mhando: Iko kukosha kwehuwandu hwekuratidzira kweW1 knob pachiratidziro chekuratidzira, inochinjika kubva 0 ku 9999;
F2W2 mhando: Iko kukosha kwehuwandu hwekuratidzira kweW2 knob pachiratidziro chekuratidzira, inochinjika kubva 0 ku 9999;
F3W3 mhando: Iko kukosha kwehuwandu hwekuratidzira kweW3 knob pachiratidziro chekuratidzira, inochinjika kubva 0 ku 9999;
F4W4 mhando: The display range value of the W4 knob on the display screen, inochinjika kubva 0 ku 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
8.Remote control electrical characteristics
9.Remote control size
The final interpretation right of this product belongs only to our company.
