Crawler wire saw machine ස්වයංක්‍රීය රැහැන් රහිත දුරස්ථ පාලක DH12S-LD

විස්තර

නිෂ්පාදන ආකෘතිය

ආකෘතිය: DH12S-LD

අදාළ උපකරණ:crawler wire saw machine

නිෂ්පාදන උපාංග රූප සටහන

සටහන: ඔබට ඇන්ටනා තිදෙනාගෙන් එකක් තෝරා ගත හැකිය. චූෂණ කුසලාන ඇන්ටෙනාව පෙරනිමියෙන් ප්රමිතියකි.

දුරස්ථ පාලක ස්විච් විස්තරය

DisplicContent හැඳින්වීම

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (පරාමිතීන් වෙනස් කළ හැකිය)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

අඩු වෝල්ටීයතාව: දුරස්ථ පාලක බැටරිය ඉතා අඩුය, කරුණාකර බැටරිය ආදේශ කරන්න.

ජාලය පහත වැටුණි: රැහැන් රහිත සං signal ාව බාධා ඇති වේ. කරුණාකර ලබන්නාගේ බලය පරීක්ෂා කරන්න, එය නැවත ක්රියාත්මක කරන්න, දුරස්ථ පාලකය නැවත ආරම්භ කරන්න.

දුරස්ථ පාලක ක්රියාකාරී මෙහෙයුම් උපදෙස්

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, බල ස්විචය සක්රිය කරන්න, andthe display will show the motor speed, සාර්ථක ආරම්භයක් පෙන්නුම් කරයි.

2.Large motor and speed regulation

Turn the “ඉදිරියට / ආපසු හැරවීම” ඉදිරියට මාරු වන්න, the receiver’s large motor will turn on, and the display will show forward

Turn the “ඉදිරියට / ආපසු හැරවීම” ආපසු හැරවීමට මාරුවන්න, the large motor of the receiver will turn on in reverse, and the display will show reverse

භ්රමණය කරන්න “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “ඉදිරියට / ආපසු හැරවීම” ඉදිරියට මාරු වන්න, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Turn the “ඉදිරියට / ආපසු හැරවීම” ආපසු හැරවීමට මාරුවන්න, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

අතින් මාදිලියේ:
Turn left in place: Press and hold the “Enable” button, හැරෙන්න “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Press and hold the “Enable” button, හැරෙන්න “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

In automatic mode: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Automatic cutting

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: අතින් මාදිලියේ, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 වෙත 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (අවසරයකින් තොරව පරිශීලකයින්ට එය වෙනස් කිරීම තහනම් කර ඇත)

Some functions of the remote control can be adjusted through parameters. අතින් මාදිලියේ, when the small motor speed S2 is 10, ඉදිරියට / ප්රතිලෝම ස්විචය පේළි තුළ තුන් වතාවක් මාරු කරන්න, and then push it down three times in a row to enter the parameter menu;
පරාමිති මෙනුවෙන් පිටවන්න: choose to save or not save, then press the enable button to confirm the exit;
Maximum current: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, පෙරනිමි 800, වෙනස් කිරීම තහනම්ය;
Demleper පරාමිතිය: automatic cutting control parameter. When the cutting current change value exceeds this value,deceleration begins.
Acceleration a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Speed limit offset: the maximum speed of the small motor during automatic cutting.
Maximum host: maximum speed of large motor.

දුරස්ථ පාලක විද්යුත් ලක්ෂණ

දුරස්ථ පාලක ප්රමාණය

මෙම නිෂ්පාදනයේ අවසාන අර්ථකථන අයිතිය අපේ සමාගමට පමණි.