Application:used for various industrial equipment
1.Maximum 26 relay outputs.
2.Barrier-free transmission distance is 200 meters.
3. Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
4. 2 analog inputs; and displayed on the remote control, the display range can be customized.
5. 1 emergency stop relay output normally closed contact.
Model: DH01R-4W-26K
Cov Khoom Siv Tau:ntau yam khoom siv kev lag luam
Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. Lub kav hlau txais xov nqus yog tus qauv los ntawm lub neej ntawd.
Ceeb toom:
(1) DH01R series, yog tias lub suffix muaj T, nws txhais tau tias nrog kev kub ntxhov nres tso zis;tsis muaj T, nws txhais tau tias tsis muaj xwm ceev nres tso zis.
(2) Yog tias tsis muaj cov zis analog, tsis tas yuav nco ntsoov 0W lossis 0R; cov analog ntau W1, W2, W3, thiab W4 lub neej ntawd rau 0-10V analog voltage tso zis; nyob rau tib lub sijhawm, W1 thiab W2 tuaj yeem nthuav dav rau 2 cais tawm digital potentiometer outputs, nrog ntau yam ntawm 0 -5K ohms, 1/2 watt; kev daws teeb meem: 20 ohms. Ob lub digital potentiometer tuaj yeem siv los tswj cov vuam tam sim no thiab vuam hluav taws xob ntawm lub tshuab vuam. Yog tias yuav tsum muaj cov zis digital potentiometer, cov neeg siv ntawv yuav tsum tau.
(4) Analog input, ntau yam los ntawm 1 rau 2, qhia tias muaj a 1 rau 2 analog inputs(maximum 2 channels); thaum muaj ib qho analog input, koj yuav tsum nco ntsoov qhov hluav taws xob ntau ntawm cov tswv yim analog (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, thiab lwm yam) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
1）Maximum 26 relay outputs;
2）Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
3）2 analog inputs; and displayed on the remote control, the display range can be customized
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA roj teeb, low power consumption design;
6） Wireless operation distance is 200 meters;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.
W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)
Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, Thov hloov lub roj teeb.
Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, thiab rov pib dua cov chaw taws teeb tswj.
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Tawm ntawm cov ntawv qhia zaub mov parameter: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 rau 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 rau 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 rau 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 rau 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
Qhov kawg txhais txoj cai ntawm cov khoom no tsuas yog peb lub tuam txhab.
