Daim Ntawv Thov Kev Pab:used for various industrial equipment
1.Maximum 26 relay outputs.
2.Barrier-dawb transmission nyob deb li cas yog 200 xov.
3. Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
4. 2 analog inputs; and displayed on the remote control, the display range can be customized.
5. 1 emergency stop relay output normally closed contact.
qauv: DH01R-4W-26K
Siv cov khoom siv:various industrial equipment
Ntawv Ceeb Toom: Koj yuav xaiv tau ib qhov peb antennas. Lub khob suction antenna yog txheem los ntawm default.
Ntawv Ceeb Toom:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.
②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, thiab W4 default rau 0-10V analog voltage tso zis; tib lub sijhawm, W1 thiab W2 yuav tau txhab rau 2 raug rho tawm cov potentiometer tso zis, muaj ntau hom 0 -5K ohms, 1/2 watt; daws teeb meem: 20 huag. Qhov ob cov tej zaum yuav siv los tswj lub welding tam sim no thiab welding voltage ntawm lub tshuab welding tshuab. Yog hais tias cov potentiometer tso zis yuav tsum tau txhaj, cov neeg siv yuav tsum tau txhaj.
(4)Analog input, xws li 1 mus rau 2, qhia tias muaj 1 mus rau 2 analog inputs(ntau kawg 2 channels); thaum muaj analog input, Koj yuav tsum nco ntsoov cov voltage ntau yam ntawm cov analog input (Peb receiver defaults rau 0 -5V, Tus neeg siv kuj nco ntsoov li 4-20 los sis 0-10V, lwm yam.) thiab cov corresponding zaub ntau yam ntawm cov analog quantity (piv txwv: zaub 0-100 tub rog 0-1000 amp)
Cov ob analog quantities yuav siv tau raws li zaub rau welding tam sim no thiab welding voltage.
1Ntau Yam Tsawg Kawg Nkaus 26 relay outputs;
2Ntau Yam Tsawg Kawg Nkaus 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
3(2 analog inputs; and displayed on the remote control, the display range can be customized
4(1 channels ntawm kev kub ntxhov nres relay tso zis feem ntau kaw hu;
5' Powered by by 3 roj teeb, tsis muaj hwj huam noj tsim;
6• Wireless zov me nyuam nyob deb li cas yog 200 xov;
7(Tiv thaiv qib IP67;
8"Nrog hla kev zov me nyuam hloov lag luam, txhawb ob 4-taw qhia hla switches;
9"Rov qab strap tsim.
W1 knob tus nqi: W1: 0-1000 (kho parameter adjustable 0-9999)
W2 knob tus nqi: W2: 0-5000 (kho parameter adjustable 0-9999)
W3 knob tus nqi: W3: 0-5000 (kho parameter adjustable 0-9999)
W4 knob tus nqi: W4: 0-5000 (kho parameter adjustable 0-9999)
ADC1 feedback zaub: 0-1000 (kho parameter adjustable 0-5000)
ADC2 feedback zaub: 0-1000 (kho parameter adjustable 0-5000)
Tsis muaj voltage: Tej thaj chaw deb tswj roj teeb yog ib yam nkaus thiab tsis tshua muaj, thov hloov lub roj teeb.
Network poob: Lub wireless teeb liab yog interrupted. Thov xyuas lub hwj huam ntawm tus receiver, hwj huam rau dua, thiab restart tej thaj chaw deb tswj.
1' Tig rau tej thaj chaw deb tswj
Thaum tus receiver yog powered rau, Tus receiver ua hauj lwm indicator flashes; Nruab ob AA roj teeb nyob rau tej thaj chaw deb tswj, tig rau lub hwj huam hloov, thiab cov zaub qhia tau hais tias tus nqi,qhia tau meej startup. Tus receiver ua hauj lwm indicator teeb yuav solid.
2(Switch thiab khawm functions
Tej lub lag luam ntawm tus twist hloov thiab khawm rau tej thaj chaw deb tswj yuav tswj lub corresponding hloov tso zis taw tes rau lub receiver. Tag nrho hloov teeb liab tso zis ntsiab lus rau cov receiver yog nquag qhib teeb liab los ntawm default;
3"W1-W4 speed kho
Rotate lub knobs hauv W1-W4 arbitrarily khiav lag luam tus corresponding analog tso zis los yog potentiometer teeb liab ntawm tus receiver kawg. Lub analog tso zis teeb liab ntawm tus receiver xaus defaults rau ib 0-10V voltage teeb liab, thiab cov potentiometer signal defaults rau 0-5K;
4' Kev kub ceev ceev
Thaum lub pob khawm ceev ceev yog pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Tawm cov zaub mov parameter: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 mus rau 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 mus rau 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 mus rau 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 mus rau 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
Tus txhais lus kawg ntawm qhov khoom no belongs tsuas rau peb tuam txhab.
