Kev Piav Qhia Txog Kev Raug Txim
Khoom qauv
qauv: DH12S-LD
Siv cov khoom siv:crawler wire saw machine
Khoom accessories diagram
Ntawv Ceeb Toom: Koj yuav xaiv tau ib qhov peb antennas. Lub khob suction antenna yog txheem los ntawm default.
Tej thaj chaw deb tswj hloov piav
Zaubcontent taw qhia
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
Tsis muaj voltage: Tej thaj chaw deb tswj roj teeb yog ib yam nkaus thiab tsis tshua muaj, thov hloov lub roj teeb.
Network poob: Lub wireless teeb liab yog interrupted. Thov xyuas lub hwj huam ntawm tus receiver, hwj huam rau dua, thiab restart tej thaj chaw deb tswj.
Tej thaj chaw deb tswj cov kev ua hauj lwm qhia
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, tig rau lub hwj huam hloov, andthe display will show the motor speed, qhia tau meej startup.
2.Large motor and speed regulation
Tig mus rau sab xis “nraud” hloov mus rau pem hauv ntej, the receiver’s large motor will turn on, and the display will show forward
Tig mus rau sab xis “nraud” hloov rov qab, the large motor of the receiver will turn on in reverse, and the display will show reverse
Rotate lub rotate “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “nraud” hloov mus rau pem hauv ntej, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Tig mus rau sab xis “Pem Hauv ntej/Reverse” hloov rov qab, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Tig mus rau sab xis “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Tig mus rau sab xis “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
hom:
Turn left in place: Xovxwm thiab tuav cov “Enable” button, tig “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Xovxwm thiab tuav cov “Enable” button, tig “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Enable” khawm thiab tig tau lub taub hau “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Tej qhov nqaij
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: hom, press and hold the “Enable” khawm thiab tig tau lub taub hau “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 mus rau 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (Cov neeg siv yog txwv los ntawm modifying nws tsis tso cai)
Some functions of the remote control can be adjusted through parameters. hom, when the small motor speed S2 is 10, thawb rau pem hauv ntej/reverse hloov txog peb zaug uake, and then push it down three times in a row to enter the parameter menu;
Tawm cov zaub mov parameter: choose to save or not save, then press the enable button to confirm the exit;
Qhov Ntau Tshaj Plaws: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, neeg tsis zoo 800, kev hloov kho dua tshiab;
Deceleration parameter: automatic cutting control parameter. Thaum twg tus nqi tam sim no hloov tus nqi tshaj qhov nqi,deceleration begins.
Acceleration a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Ntau taug kev: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Speed txwv offset: the maximum speed of the small motor during automatic cutting.
Tus tswv tsev ntau tshaj plaws: maximum speed of large motor.
Tej thaj chaw deb tswj hluav taws xob characteristics
Tej thaj chaw deb tswj loj
Tus txhais lus kawg ntawm qhov khoom no belongs tsuas rau peb tuam txhab.
