Whakaahuatanga
Tauira hua
Tauira: DH12S-LD
Nga taputapu e tika ana:crawler wire saw machine
Hoahoa Hua
Tuhipoka: Ka taea e koe te whiriwhiri i tetahi o nga antenas e toru. Ko te kopae o te Cup Antena he paerewa ma te taunoa.
Whakaahuatanga Whakawhiti Mamao
Whakataki Whakaaturanga
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (Nga tohu e taea ana te whakarite)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
Ngaohiko iti: He iti rawa te pākahiko mana whakahaere, Whakakapia te pākahiko.
Kua heke te whatunga: Ko te tohu ahokore ka haukotia. Tena tirohia te mana o te kaiwhiwhi, mana i runga ano, me te whakaara ano i te mana mamao.
Tohutohu Mahi Mahi Mamao
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, Tahuri ki te huringa mana, andthe display will show the motor speed, e tohu ana i te tiimata angitu.
2.Large motor and speed regulation
Tahuri te “whakamua / whakamuri” hurihuri ki mua, the receiver’s large motor will turn on, and the display will show forward
Tahuri te “whakamua / whakamuri” hurihuri ki te hoki whakamuri, the large motor of the receiver will turn on in reverse, and the display will show reverse
Hurihia te “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “whakamua / whakamuri” hurihuri ki mua, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Tahuri te “Whakamua / whakamuri” hurihuri ki te hoki whakamuri, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Tahuri te “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Tahuri te “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
I roto i te aratau ā-ringa:
Turn left in place: Pēhi me te pupuri i te “Enable” button, Tahuri te “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Pēhi me te pupuri i te “Enable” button, Tahuri te “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Enable” pātene me te huri i te “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Tapahi aunoa
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: I roto i te aratau ā-ringa, press and hold the “Enable” pātene me te huri i te “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 ki 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (Ka rukuhia nga kaiwhakamahi ki te whakarereke i te kore whakaaetanga)
Some functions of the remote control can be adjusted through parameters. I roto i te aratau ā-ringa, when the small motor speed S2 is 10, pana te hurihuri whakamua / whakamuri hurihuri kia toru nga wa i roto i te rarangi, and then push it down three times in a row to enter the parameter menu;
Puta i te tahua tohu: Kōwhiria kia penapena, kaua e whakaora, then press the enable button to confirm the exit;
Nui rawa atu: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, hapanga 800, Kua aukatia te whakarereketanga;
Tohu tinihanga: automatic cutting control parameter. I te wa e nui ake ai te uara whakarereke i tenei wa,deceleration begins.
Whakatere A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
The A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Te haere nui: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Ko te rohe tere tere: the maximum speed of the small motor during automatic cutting.
He nui te ope nui: maximum speed of large motor.
Remote control electrical characteristics
Remote control size
The final interpretation right of this product belongs only to our company.
