Description
Modely vokatra
Model: DH12S-LD
Fitaovana azo ampiharina:crawler wire saw machine
Ny sary miditra amin'ny vokatra
Fanamarihana: Azonao atao ny misafidy ny iray amin'ireo Antena telo. Ny Antenna Cup Suction dia fenitra amin'ny alàlan'ny default.
Famaritana ny switch remote
Displaycontent introduction
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
Voltage ambany: Ny bateria fanaraha-maso lavitra dia ambany loatra, Azafady azafady ny bateria.
Nilatsaka ny tambajotra: Ny famantarana an-tariby dia tapaka. Azafady mba jereo ny herin'ilay mpandray, herim-po indray, ary avereno ny fanaraha-maso lavitra.
Fanaraha-maso ny fanaraha-maso lavitra
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, mihodina ny switch herinaratra, andthe display will show the motor speed, manondro fanombohana mahomby.
2.Large motor and speed regulation
Avadika ny “forward/reverse” Mihodinkodina amin'ny handroso, the receiver’s large motor will turn on, and the display will show forward
Avadika ny “forward/reverse” mifamadika amin'ny mifamadika, the large motor of the receiver will turn on in reverse, and the display will show reverse
Hodio ny “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “forward/reverse” Mihodinkodina amin'ny handroso, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Avadika ny “Mandroso / mifamadika” mifamadika amin'ny mifamadika, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Avadika ny “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Avadika ny “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
In manual mode:
Turn left in place: Press and hold the “Enable” button, avadika ny “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Press and hold the “Enable” button, avadika ny “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Tapaka mandeha ho azy
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: In manual mode, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 ny 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (users are prohibited from modifying it without permission)
Ny sasany miasa amin'ny fanaraha-maso lavitra dia azo amboarina amin'ny alàlan'ny tarehimarika. In manual mode, when the small motor speed S2 is 10, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enter the parameter menu;
Mialà amin'ny menu paramètre: misafidy ny hamonjy na tsia, then press the enable button to confirm the exit;
Ny tena ambony indrindra: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, toerana misy anao 800, Voarara ny fanovana;
Fehezan-dalàna fametahana: automatic cutting control parameter. Rehefa mihoatra ny sandany ity lafo vidy ity,deceleration begins.
Acceleration A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Seceleration A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Mandeha ambony indrindra: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Fomba fanodinana hafainganam-pandeha: the maximum speed of the small motor during automatic cutting.
Host-Hostur: maximum speed of large motor.
Toetr-toetra elektrika fanaraha-maso lavitra
Ny haben'ny fanaraha-maso lavitra
Ny zo fandikana farany amin'ity vokatra ity dia tsy ao amin'ny orinasanay fotsiny.
