Handwheel Handwheel DWGP

ລາຍລະອຽດ

1.ການແນະນໍາກ່ຽວກັບຜະລິດຕະພັນ

ມືຖືແບບເອເລັກໂຕຣນິກແບບໄຮ້ສາຍແມ່ນໃຊ້ສໍາລັບການນໍາພາໂດຍໃຊ້ຈ່າຍ, ການຈັດຕໍາແຫນ່ງ, tool setting and
other operations of CNC machine tools. ຜະລິດຕະພັນນີ້ຮັບຮອງເອົາເຕັກໂນໂລຢີການສົ່ງແບບໄຮ້ສາຍ,
ການລົບລ້າງການເຊື່ອມຕໍ່ສາຍໃນພາກຮຽນ spring ແບບດັ້ງເດີມ, ການຫຼຸດຜ່ອນຄວາມລົ້ມເຫຼວຂອງອຸປະກອນທີ່ເກີດຈາກສາຍໄຟ,
eliminating the disadvantages of cable dragging, oil stains, ແລະອື່ນໆ, and is more convenient to
operate. It is widely used in CNC machine tools such as gantry machining centers, gantry
vertical lathes, CNC gear processing machines, and can be adapted to a variety of CNC
systems on the market, such as Siemens, Mitsubishi, fanuc, syntec and other CNC system
brands.

2.ຄຸນນະສົມບັດຜະລິດຕະພັນ

1. ຮັບຮອງເອົາເຕັກໂນໂລຢີການສື່ສານໄຮ້ສາຍ 43MHZ, ໄລຍະທາງການປະຕິບັດງານໄຮ້ສາຍແມ່ນ 80 ປະມານ;
2. ຮັບຮອງເອົາຟັງຊັນຄວາມຖີ່ຂອງອັດຕະໂນມັດ, ໃຊ້ 32 sets of wireless remote controllers at the
same time without affecting each other;
3. ສະຫນັບສະຫນູນປຸ່ມຢຸດສຸກເສີນ, and after the handwheel is turned off, the emergency stop
button is still valid;
4. ບູຊາ 6 ປຸ່ມປະເພນີ, ປ່ຽນສັນຍາ IO IUTER;
5. ຮອງຮັບການຄວບຄຸມ 6 ແກນ, 7-12 axis control can be customized;
6. Supports 1X,10ສະຖາວັນ, 100X control and can be maximum customizable 1000X;
7. Supports the enable button function, output switch l0 sianals. axis selection,maanification
and encoder.;
8. Support axis selection and magnification selection encoder output;
9. Support standard Type-C charging, 5v-2a ການຂຸດຄົ້ນສະເພາະ, built-in battery specification
14500/1100mAh.

3.ຂໍ້ມູນສະເພາະຂອງຜະລິດຕະພັນ

4.ຄໍາແນະນໍາກ່ຽວກັບການຜະລິດຕະພັນສິນຄ້າ

ບັນທຶກ：
ປຸ່ມ Stop Stop ①emearGeny：
When the emergency stop button is pressed, the two emergency stop IO outputs on
the receiver are disconnected, and all handwheel functions are invalid. When the emergency
stop is released, the emergency stop IO output on the receiver is closed, and all handwheel
functions are restored; and after the handwheel is turned off, the emergency stop IO output
of the receiver is still valid when the emergency stop button is pressed.

②Enable button:
Press any one of the enable buttons on both sides, and the two groups of enable IO
outputs on the receiver will be turned on. Release the enable button and the enable IO
output will be turned off. ເພີ່ມເຕີມ, you need to press and hold the enable button before
switching the axis selection ratio and shaking the handwheel. This function can be
canceled through the configuration software.
③Axis selection switch (power switch):
Press and hold the enable button and switch the axis selection switch to switch the
moving axis controlled by the handwheel. Switch this switch from OFF to any axis and
turn on the handwheel power.

④Pulse encoder:
ກົດປຸ່ມແລະກົດປຸ່ມ Enable ແລະສັ່ນຕົວລະຫັດກໍາມະຈອນເພື່ອສົ່ງອອກກໍາມະຈອນ
ສັນຍານຄວບຄຸມການເຄື່ອນໄຫວຂອງແກນເຄື່ອງ.

⑤Battery indicator:
The hand wheel power display, all bright means full power, all off means it is not
turned on or has no power, the first left grid flashes, indicating that the power is too low,
please charge in time.
⑥Signal Lights:
If the signal light is on, it means the handwheel is being operated and the signal is
normal; if the signal light is off, it means there is no operation, or it is being operated but
the wireless signal is not connected.

5.ແຜນວາດອຸປະກອນເສີມ

6.ຄູ່ມືການຕິດຕັ້ງຜະລິດຕະພັນ

6.1 ຂັ້ນຕອນການຕິດຕັ້ງຜະລິດຕະພັນ
1. Install the receiver in the electrical cabinet using the clips on the back, or install it in
the electrical cabinet using the screw holes at the four corners of the receiver.
2.ອ້າງເຖິງແຜນວາດສາຍໄຟຂອງພວກເຮົາ, ສົມທຽບມັນກັບອຸປະກອນທີ່ຢູ່ໃນສະຖານທີ່ຂອງທ່ານ, ແລະເຊື່ອມຕໍ່
ອຸປະກອນທີ່ໃຫ້ກັບຜູ້ຮັບຜ່ານສາຍໄຟ.
3.ຫຼັງຈາກຜູ້ຮັບໄດ້ຖືກແກ້ໄຂແລ້ວ, ເສົາອາກາດທີ່ມີໃຫ້ກັບຜູ້ຮັບຕ້ອງໄດ້ເຊື່ອມຕໍ່,
ແລະດ້ານນອກຂອງເສົາອາກາດຕ້ອງໄດ້ຕິດຕັ້ງຫຼືວາງຢູ່ນອກຕູ້ໄຟຟ້າ. ມັນ
is recommended to place it on the top of the electrical cabinet for the best signal effect. It is
forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet,
ເຊິ່ງອາດຈະເຮັດໃຫ້ສັນຍານສາມາດໃຊ້ງານໄດ້.
4. ທີ່ສຸດ, ເປີດເຄື່ອງຈັກປ່ຽນໄຟຟ້າມືແລະທ່ານສາມາດປະຕິບັດງານໄດ້ໂດຍ
ການຄວບຄຸມໄລຍະໄກ Handwheel.

6.2 ຂະຫນາດການຕິດຕັ້ງຮັບ

6.3 ແຜນວາດສາຍໄຟສາຍ

7.ຄໍາແນະນໍາກ່ຽວກັບການປະຕິບັດງານຜະລິດຕະພັນ
1. The machine is powered on, the receiver is powered on, the receiver working indicator
light flashes, the wireless electronic handwheel has the battery installed, the battery cover
is fastened, the wireless electronic handwheel power switch is turned on, and the
handwheel power light is on;
2. Select the coordinate axis: Press and hold the enable button, switch the axis selection
ສັບປ່ຽນ, and select the axis you want to operate on;
3. Select magnification: Press and hold the enable button, switch the magnification switch,
and select the magnification level you need;
4. Moving axis: Press and hold the enable button, select the axis selection switch, select
the magnification switch, and then rotatethe pulse encoder to rotate the positive moving axis
clockwise and the negative moving axis counterclockwise;
5. Press and hold any custom button, and the corresponding button IO output of the
receiver will be turned on. Release the button to turn off the output;
6. ກົດປຸ່ມຢຸດສຸກເສີນ, the corresponding emergency stop IO output of the
receiver is disconnected, the handwheel function is disabled, release the emergency stop
button, the emergency stop IO output is closed, and the handwheel function is restored;
7. If the handwheel is not operated for a period of time, it will automatically enter sleep
mode to reduce power consumption. When it is used again, the handwheel can be
activated by pressing the enable button;
8. If the handwheel is not used for a long time,it is recommended to switch the handwheel
shaft to the OFF position, turn off the handwheel power, and extend the battery life.

8.Product Model Description

① ：DWGP represents the appearance style

② ：Pulse output parameters:
01: Indicates that the pulse output signals are A and B, and the pulse voltage is 5V; Pulse
quantity 100PPR;
02: Indicates that the pulse output signals are A and B, and the pulse voltage is 12V; Pulse
quantity 25PPR;
03: Indicates that the pulse output signal is A B、A-、B-； Pulse voltage 5V; Pulse quantity 1
00PPR;
04: Indicates a low-level NPN open circuit output, with pulse output signals of A and B; ໄດ້
number of pulses is 100PPR;05: Indicates high-level PNP source output, pulse output signals
are A and B; pulse quantity is 100PPR;
③ : represents the number of axis selection switches, 6 represents 6 ແກນ, 7 represents 7 ແກນ.
④ : represents the type of axis selection switch signal, A represents point-to-point output signal,
B represents encoded output signal;

⑤ : represents the type of magnification switch signal,
A represents point-to-point output signal, B represents encoded output signal;
⑥ : represents the number of custom buttons, 6 represents 6 ປຸ່ມປະເພນີ;
⑦ : represents the power supply for the system handwheel, 05 represents 5V power supply,
and 24 represents 24V power supply.

9.ການແກ້ໄຂບັນຫາຜະລິດຕະພັນ

10. ການບໍາລຸງຮັກສາແລະການດູແລ

1. Please use it in a dry environment at room temperature and pressure to extend its service life;
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life;
3. Please keep the appearance of the handwheel clean to extend its service life;
4. ກະລຸນາຫລີກລ້ຽງການບີບຕົວ, ການຕົກຕໍ່າ, ຕໍາແພ, ປົງຄາຍ. to prevent damage to the precision components inside
the handwheel or accuracy errors;
5. ຖ້າບໍ່ໃຊ້ເປັນເວລາດົນນານ, ກະລຸນາເກັບມ້ຽນ handwheel ໃນສະຖານທີ່ທີ່ສະອາດແລະປອດໄພ;
6.During storage and transportation, attention should be paid to moisture and shock resistance.

11.ຂໍ້ມູນຄວາມປອດໄພ

1. Please read the instructions carefully before use and prohibit non professionals from operating;
2. When the battery level is too low, please charge it in time to avoid errors caused by insufficient
battery and inability to operate the handwheel;

3. ຖ້າຕ້ອງການສ້ອມແປງ, ກະລຸນາຕິດຕໍ່ຜູ້ຜະລິດ. If the damage is caused by self repair, ຜູ້ຜະລິດຈະບໍ່ໃຫ້ການຮັບປະກັນ.