S6T
1.Product model
ຕົວແບບ: DH01R-4W-26K
Applicable equipment:various industrial equipment
2.Product accessories diagram
ຫມາຍເຫດ: You can choose one of the three antennas. The suction cup antenna is standard by default.
3.Product model description
ຫມາຍເຫດ:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.
②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.
④Analog input, ranging from 1 to 2, ຊີ້ໃຫ້ເຫັນວ່າມີ 1 to 2 ວັດສະດຸປ້ອນອະນາລັອກ(ສູງສຸດ 2 ຊ່ອງ); ເມື່ອມີການປ້ອນຂໍ້ມູນແບບອະນາລັອກ, ທ່ານຈໍາເປັນຕ້ອງສັງເກດລະດັບແຮງດັນຂອງການປ້ອນຂໍ້ມູນອະນາລັອກ (ຜູ້ຮັບຂອງພວກເຮົາເລີ່ມຕົ້ນເປັນ 0 -5ວ, ຜູ້ໃຊ້ຍັງສາມາດສັງເກດເຫັນເປັນ 4-20 mA ຫຼື 0-10V, ແລະອື່ນໆ) ແລະລະດັບການສະແດງຜົນທີ່ສອດຄ້ອງກັນຂອງປະລິມານການປຽບທຽບ (ຍົກຕົວຢ່າງ: ຈໍສະແດງຜົນ 0-100 volts ຫຼື 0-1000 amps)
ເຫຼົ່ານີ້ທັງສອງປະລິມານການປຽບທຽບສາມາດຖືກນໍາໃຊ້ເປັນການສະແດງສໍາລັບການເຊື່ອມໂລຫະໃນປະຈຸບັນແລະແຮງດັນການເຊື່ອມ.
4.ຄຸນລັກສະນະ
1）Maximum 26 ເຄື່ອງເຊື່ອມອັດຕະໂນມັດການເຊື່ອມໂລຫະແລະການເຊື່ອມໂລຫະ operator.Turn Rolls 1.Using frequency hopping transmission technology;
2）Maximum 4 ຊ່ອງສັນຍານຂອງຜົນຜະລິດ 0-10V analog (ຂອບເຂດການສະແດງສາມາດປັບແຕ່ງໄດ້): ສະຫນັບສະຫນູນ 2 ຊ່ອງທາງຂອງການຂະຫຍາຍອອກ potentiometer ດິຈິຕອນໂດດດ່ຽວຜົນຜະລິດ;
3）2 analog inputs; ແລະສະແດງຢູ່ໃນການຄວບຄຸມໄລຍະໄກ, ຂອບເຂດການສະແດງສາມາດປັບແຕ່ງໄດ້
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 ໝໍ້ໄຟ AA, ການອອກແບບການບໍລິໂພກພະລັງງານຕ່ໍາ;
6） Wireless operation distance is 200 ແມັດ;
7）Protection grade IP67;
8）With cross switch operation, ຮອງຮັບສອງສະຫຼັບຂ້າມ 4 ທິດທາງ;
9）Back strap design.
5.ລາຍລະອຽດຂອງປຸ່ມຄວບຄຸມໄລຍະໄກ
6.ສະແດງເນື້ອຫາແນະນໍາ
ຄ່າຂອງລູກບິດ W1: W1: 0-1000 (ພາລາມິເຕີທີ່ສາມາດປັບໄດ້ 0-9999)
W2 knob value: W2: 0-5000 (ພາລາມິເຕີທີ່ສາມາດປັບໄດ້ 0-9999)
W3 knob value: W3: 0-5000 (ພາລາມິເຕີທີ່ສາມາດປັບໄດ້ 0-9999)
W4 knob value: W4: 0-5000 (ພາລາມິເຕີທີ່ສາມາດປັບໄດ້ 0-9999)
ADC1 feedback display: 0-1000 (ພາລາມິເຕີທີ່ສາມາດປັບໄດ້ 0-5000)
ADC2 feedback display: 0-1000 (ພາລາມິເຕີທີ່ສາມາດປັບໄດ້ 0-5000)
Low voltage: The remote control battery is too low, please replace the battery.
Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.
7.Remote control function operation instructions
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 to 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 to 9999;
F4W4 range: ຄ່າຊ່ວງການສະແດງຂອງລູກບິດ W4 ໃນໜ້າຈໍສະແດງຜົນ, adjustable from 0 to 9999
ຊ່ວງ F5A1: ສະແດງຄ່າໄລຍະສະແດງຜົນຕອບຮັບຂອງ ADC1, 0-5000 ປັບໄດ້;
ຊ່ວງ F6A2: ສະແດງຄ່າຂອບເຂດສະແດງຜົນຕອບຮັບ ADC2, 0-5000 ປັບໄດ້;
ກະແສປຸກ: ກໍານົດຄ່າປຸກສໍາລັບການສະແດງຄໍາຕິຊົມ ADC1 ແລະ ADC2. ເມື່ອ ADC1 ແລະ ADC2 ເກີນຄ່ານີ້, ຈໍສະແດງຜົນການຄວບຄຸມໄລຍະໄກຈະປຸກ; ເມື່ອຄ່ານີ້ແມ່ນ 0, ຟັງຊັນປຸກບໍ່ຖືກຕ້ອງ;
8.ລັກສະນະໄຟຟ້າຄວບຄຸມໄລຍະໄກ
9.ຂະຫນາດການຄວບຄຸມໄລຍະໄກ
ສິດທິການຕີຄວາມສຸດທ້າຍຂອງຜະລິດຕະພັນນີ້ເປັນຂອງບໍລິສັດຂອງພວກເຮົາເທົ່ານັ້ນ.
