ຄໍາຮ້ອງສະຫມັກ:ໃຊ້ໂດຍສະເພາະສໍາລັບສາຍທີ່ກ້ວາງຂວາງ
1.ສະຫນັບສະຫນູນຮູບແບບການຕັດໂດຍອັດຕະໂນມັດ, ປັບຄວາມໄວໃນເວລາຍ່າງຂອງມໍເຕີຂະຫນາດນ້ອຍໂດຍອັດຕະໂນມັດຕາມກະແສມໍເຕີຂະຫນາດໃຫຍ່, ແລະບັນລຸການຄວບຄຸມການຕັດໂດຍອັດຕະໂນມັດ.
2.ໄລຍະທາງລະບົບການສົ່ງຕໍ່ໂດຍບໍ່ເສຍຄ່າ 200 ປະມານ.
3. ສະຫນັບສະຫນູນລະບຽບຄວາມໄວດ້ານຄວາມໄວສໍາລັບມໍເຕີໃຫຍ່ແລະເຄື່ອງຈັກນ້ອຍ.
4. ສະຫນັບສະຫນູນການຫັນເປັນຂະຫນາດນ້ອຍ.
5. ສະຫນັບສະຫນູນການແກ້ໄຂບັນຫາຂະຫນາດນ້ອຍທີ່ມີລໍ້ຊ້າຍແລະຂວາ.
ແບບ: DH12S-LD
ອຸປະກອນທີ່ໃຊ້ໄດ້:crawler wire saw machine
ຫມາຍເຫດ: ທ່ານສາມາດເລືອກເອົາຫນຶ່ງໃນສາມເສົາອາກາດ. ເສົາອາກາດການດູດນ້ໍາແມ່ນມາດຕະຖານໂດຍຄ່າເລີ່ມຕົ້ນ.
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (ພາລາມິເຕີສາມາດປັບໄດ້)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
ແຮງດັນຕ່ໍາ: ແບດເຕີລີ່ຄວບຄຸມໄລຍະໄກແມ່ນຕໍ່າເກີນໄປ, ກະລຸນາທົດແທນແບັດເຕີຣີ.
ເຄືອຂ່າຍຫຼຸດລົງ: ສັນຍານໄຮ້ສາຍແມ່ນຂັດຂວາງ. ກະລຸນາກວດສອບພະລັງງານຂອງຜູ້ຮັບ, ພະລັງງານມັນອີກເທື່ອຫນຶ່ງ, ແລະເລີ່ມຕົ້ນການຄວບຄຸມໄລຍະໄກ.
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, ເປີດໃຊ້ໄຟຟ້າ, andthe display will show the motor speed, ສະແດງການເລີ່ມຕົ້ນທີ່ສໍາເລັດຜົນ.
2.Large motor and speed regulation
ສົ່ງ “ຕໍ່ຫນ້າ / ດ້ານ” ປ່ຽນໄປຂ້າງຫນ້າ, the receiver’s large motor will turn on, and the display will show forward
ສົ່ງ “ຕໍ່ຫນ້າ / ດ້ານ” ປ່ຽນໄປປີ້ນກັບກັນ, the large motor of the receiver will turn on in reverse, and the display will show reverse
ຫມຸນໄດ້ “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “ຕໍ່ຫນ້າ / ດ້ານ” ປ່ຽນໄປຂ້າງຫນ້າ, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
ສົ່ງ “ຕໍ່ຫນ້າ / ດ້ານ” ປ່ຽນໄປປີ້ນກັບກັນ, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
ສົ່ງ “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
ສົ່ງ “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
ໃນຮູບແບບຄູ່ມື:
Turn left in place: ກົດແລະຖື “Enable” button, ສົ່ງ “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: ກົດແລະຖື “Enable” button, ສົ່ງ “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Enable” ປຸ່ມແລະຫມຸນ “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.ການຕັດອັດຕະໂນມັດ
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: ໃນຮູບແບບຄູ່ມື, press and hold the “Enable” ປຸ່ມແລະຫມຸນ “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (ຜູ້ໃຊ້ຖືກຫ້າມບໍ່ໃຫ້ປັບປຸງມັນໂດຍບໍ່ໄດ້ຮັບອະນຸຍາດ)
Some functions of the remote control can be adjusted through parameters. ໃນຮູບແບບຄູ່ມື, when the small motor speed S2 is 10, ຍູ້ດ້ານຂ້າງຫນ້າ / ປີ້ນກັບກັນສາມຄັ້ງຕິດຕໍ່ກັນ, and then push it down three times in a row to enter the parameter menu;
ອອກຈາກເມນູພາລາມິເຕີ: choose to save or not save, then press the enable button to confirm the exit;
ກະແສສູງສຸດ: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, ໃນຕອນຕົ້ນ 800, ການດັດແປງແມ່ນຖືກຫ້າມ;
ພາລາມິເຕີ Decelation: automatic cutting control parameter. ໃນເວລາທີ່ການຕັດມູນຄ່າການປ່ຽນແປງໃນປະຈຸບັນເກີນມູນຄ່ານີ້,deceleration begins.
ການເລັ່ງ A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
deceleration A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
ການຍ່າງສູງສຸດ: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
ຂອບເຂດຈໍາກັດຄວາມໄວ: the maximum speed of the small motor during automatic cutting.
ເຈົ້າພາບສູງສຸດ: maximum speed of large motor.
ການຕີລາຄາສຸດທ້າຍສິດທິຂອງຜະລິດຕະພັນນີ້ເປັນຂອງບໍລິສັດຂອງພວກເຮົາເທົ່ານັ້ນ.
