Aplikasi:digunakake kanggo macem-macem peralatan industri
1.maksimal 26 output relay.
2.Jarak transmisi bebas alangi yaiku 200 meter.
3. maksimal 4 saluran output analog 0-10V (sawetara tampilan bisa selaras): ndhukung 2 saluran output potensiometer digital terisolasi lengkap;
4. 2 input analog; lan ditampilake ing remot kontrol, sawetara tampilan bisa selaras.
5. 1 output relay mandeg darurat biasane ditutup kontak.
Model: DH01R-4W-26K
Peralatan sing ditrapake:macem-macem peralatan industri
Cathetan: Sampeyan bisa milih salah siji saka telung antena. Antena cangkir nyedhot standar minangka standar.
Cathetan:
① seri DH01R, yen sufiks kasebut ngemot T, tegese karo output mandeg darurat;tanpa T, it means without emergency stop output.
②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.
④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 input analog(maximum 2 saluran); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, lsp.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
1）Maximum 26 output relay;
2）Maximum 4 saluran output analog 0-10V (sawetara tampilan bisa selaras): ndhukung 2 saluran output potensiometer digital terisolasi lengkap;
3）2 analog inputs; lan ditampilake ing remot kontrol, sawetara tampilan bisa selaras
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 baterei AA, desain konsumsi daya kurang;
6） Wireless operation distance is 200 meter;
7）Protection grade IP67;
8）With cross switch operation, ndhukung loro 4-arah ngalih salib;
9）Back strap design.
Nilai kenop W1: W1: 0-1000 (parameter luwes 0-9999)
W2 knob value: W2: 0-5000 (parameter luwes 0-9999)
W3 knob value: W3: 0-5000 (parameter luwes 0-9999)
W4 knob value: W4: 0-5000 (parameter luwes 0-9999)
ADC1 feedback display: 0-1000 (parameter luwes 0-5000)
ADC2 feedback display: 0-1000 (parameter luwes 0-5000)
Low voltage: The remote control battery is too low, please replace the battery.
Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 detik sawise remot kontrol dipateni, kabeh output sinyal switch wis pedhot lan jumlah analog tetep panggah. Nalika remot kontrol diuripake, output sinyal ngalih kanthi otomatis pulih;
5）Parameter menu (pangguna dilarang ngowahi kanthi pribadi)
Sawetara fungsi remot kontrol bisa diatur liwat paramèter. Nalika tampilan W1 = 0, pencet tombol K9-B 3 kaping ing saurutan, banjur pencet tombol K9-A 3 kaping saurutan kanggo ngetik menu parameter; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 to 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 to 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
The final interpretation right of this product belongs only to our company.
