Crawler waya saw inji atomatik mara waya ta ramut DH12S-LD

Aikace-aikace:Ana amfani da shi na musamman don na'urar gani na waya

1.Yana goyan bayan yanayin yanke ta atomatik, ta atomatik yana daidaita saurin tafiya na ƙaramin motar bisa ga babban injin halin yanzu, kuma yana samun kulawar yankewa ta atomatik.

2.Nisan watsawa mara shamaki shine 200 mita.

3. Yana goyan bayan ƙa'idar gudu biyu don manyan injina da ƙananan injina.

4. Taimaka wa ƙaramin motar juyawa a wuri.

5. Yana goyan bayan gyare-gyaren gyare-gyare na ƙananan motar hagu da dama.

Consumptionaramar amfani da ƙararraki
Sauki don amfani

Bayani

Tsarin Samfura

Samfura: Dh12s-ld

Kayan aiki da aka zartar:Waya mai rarrafe

Kayan haɗi na samfur

Lura: Kuna iya zaɓar ɗaya daga cikin ukun ukun. An antenna na kofin cuptenna shine daidaitaccen ma'auni.

Bayanin sauya iko mai nisa

Gabatarwa Gabatarwa

Babban saurin motsa jiki：S1：0-50
Motar Motar: S2: 0-50
Matsakaicin Buttomicrofatomatic:F:0-30(sifarar kai)
Atomatik yanka yankewa na yanzu: IC: 0-35 (sigogi daidaitacce)
Darajar gyara layin: DF: -99-99 (1 naúrar kusan 0.02v)

Ƙananan ƙarfin lantarki: Baturin ramut ya yi ƙasa sosai, don Allah musanya baturin.

An bar cibiyar sadarwa: An katse siginar mara waya. Da fatan za a duba ƙarfin mai karɓa, kunna shi kuma, kuma zata sake kunna remote.

Umurnin aikin sarrafawa mai nisa

1.Kunna ikon nesa

Lokacin da aka kunna, Haske na RF-LED a kan mai karɓa yana farawa zuwa Flash;Sanya baturan AA guda biyu a cikin bata lokaci, kunna wutar lantarki, Kuma allon nuni zai nuna saurin motocin, yana nuna farawa mai nasara.

2.Babban abin hawa da tsari mai sauri

Juya “Gabatarwa / baya” Sauya zuwa gaba, babban abin da aka karba zai kunna, kuma nuna zai nuna gaba

Juya “Gabatarwa / baya” Sauya zuwa juyawa, the large motor of the receiver will turn on in reverse, and the display will show reverse

Juya da “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “Gabatarwa / baya” Sauya zuwa gaba, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Juya “Gabatarwa / baya” Sauya zuwa juyawa, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Juya “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Juya “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

A cikin yanayin jagora:
Turn left in place: Latsa ka riƙe “Ba dama” maƙulli, Juya “Hagu / dama juyawa” switch to left, da hagu na baya baya da kuma ƙafafun dama gaba na mai karɓa,kuma fara juyawa hagu a wurin;

Juya dama a wuri: Latsa ka riƙe “Ba dama” maƙulli, Juya “Hagu / dama juyawa” Sauyawa zuwa dama, da hagu na hagu na gaba da dama na mai karɓar mai karɓa ya kunna, kuma mai karba ya fara juya dama a wuri;

6.Daidaitaccen Tsarin Motar Matsayi

A yanayin atomatik: Latsa ka riƙe “Ba dama” Button kuma juya “Motar Motar Motar” Don daidaita matsakaicin mafi yawan ƙananan motar yayin yankan atomatik;

7.Atomatik yanka

Mataki na farko shine fara babban abin hawa; mataki na biyu shine a canza yanayin zuwa “Mota”; Mataki na uku shine fara karamin motar kuma allon zai nuna “Yankan auto”,yana nuna cewa ya shigar da yanayin yankan atomatik;

8. Daidaitaccen layin layi

Lokacin da hagu da dama motoci suna ci gaba da baya, Hagu da hanzari na dama ba su da mahimmanci, da madaidaiciya-layin tafiya ya karkata. Kuna iya amfani da aikin gyara na layi na ikon nesa don daidaita saurin hagu da ƙafafun dama;
Yarjejeniyar gyara: Ta hanyar gyara, saurin hagu na hagu yayi kyau, Don haka da aiki tare da motocin hagu da dama da kuma kawar da karkacewa;
Hanyar Gyara Hadawa: A cikin yanayin jagora, Latsa ka riƙe “Ba dama” Button kuma juya “Karamin tsari mai sauri”;
Juya agogo don ƙara ƙarfin ƙwarewar bindigogi da ƙididdigar gyarawa akan allon nuni zai ƙaru;
Juyawa na kai tsaye don rage ƙarfin motocin hagu da kuma gyaran nuna ma'anar don ragewa;
Correction range: Correction value -90 zuwa 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (An hana masu amfani daga canza shi ba tare da izini ba)

Wasu ayyukan sarrafawa na iya daidaita su ta hanyar sigogi. A cikin yanayin jagora, when the small motor speed S2 is 10, tura gaba / baya juyawa sau uku a jere, and then push it down three times in a row to enter the parameter menu;
Fita menu na sigari: Zaɓi don ajiyewa ko ba a adana shi ba, then press the enable button to confirm the exit;
Maximum current: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, ƙin cika alƙawari 800, An haramta gyara;
Rashin kunya: automatic cutting control parameter. Lokacin da yankan canji na yanzu ya wuce wannan darajar,deceleration begins.
Hanzari A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Yaudarar A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Speed limit offset: the maximum speed of the small motor during automatic cutting.
Maximum host: maximum speed of large motor.