Tuairisgeul
1.Introduction of remote control
a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: Coilean-làimhe dealanach + receiver;
b.Characteristics
*Thoir taic do Siemens PLC: S7-200/-300/-1200；Cuir taic ri taisbeanadh fìor-ùine de luachan co-òrdanachaidh siostam Siemens；
*Tha an astar tar-chuir gun uèir fosgailte 40 meatairean, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
*The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 làithean;
*The receiver is equipped with an external antenna to enhance the signal and is easy to install;
*Electronic handwheel support: aon encoder 100PPR 、aon suidse taghaidh axis 6-luath 、 aon tionndadh meudachaidh 3-luath;
*Electronic handwheel supports 6 putanan àbhaisteach, corresponding to Siemens PLC address, a dh’ fhaodar a phrògramadh gu saor;
*6 faodaidh putanan àbhaisteach smachd a chumail air 6 atharraich toraidhean;
*The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.
2.Application field
Programmable CNC remote control is widely used in various CNC fields such as laser engraving system, Inneal muilleidh CNC, Ionad innealachaidh CNC, gantry machine tool, msaa.
3. Introduction to the working principle
1）Electronic handwheel is connected to PLC via Ethernet receiver
a.The handwheel transmits the key data wirelessly to the receiver, and the receiver writes the keys through the network cable PLC system DB area; the receiver reads the data to be displayed from the designated DB area, and then returns the data to the handwheel display screen. The user can customize the base address of reading and writing DB area on the handwheel, so that the handwheel can read and write the data in the DB area of the PLC.
b. The receiver supports Siemens S7 protocol. Applies to PLC S7-200, PLC S7-300 and PLC S7-1200.
c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.
In the server mode, Bidh an neach-cleachdaidh a 'rèiteachadh an PLC a' leughadh agus a 'sgrìobhadh seòladh tro Bhathar-bog WGP-ENGS;Cleachd inneal rèiteachaidh ceangail PLC gus an glacadair a chuir a-steach don mhodh cliù. Às deidh rèiteachadh, Faodaidh glacadair XWGP-ETS conaltradh leis a 'PLC tro phròtacal àbhaisteach SDA.
2)Iarrtas sònraichte
Toradh sònraichte de ghlacadair-làimhe agus Siemens plc S7-200:
a. Tha am putan air an àm-làimhe a 'freagairt ri luach a' bhoool a chuir an neach-cleachdaidh anns a 'PLC. Ma thèid am putan an làimhe làimhe a bhrùthadh, Tha an raon bolto a tha co-fhreagarrach fìor, agus nuair a thèid a leigeil ma sgaoil, tha e meallta, agus faodar seòladh bonn bunait a 'bhool a stèidheachadh tron chiad-làimhe;
b. Faodaidh an tùs-làimhe luach a bhith aig luach an sgìre DB anns a 'PLC. Tha aon axis 4 bytes de dhàta taisbeanaidh, agus 6 Tha iomlan de 24 bytes. Faodar seòladh bonn an sgìre DB a shuidheachadh tro Bhathar-bog Cligidh WGP-ENTS.
4.Sealladh Ro-ràdh
5.Clàr-leulain crìochnachaidh a 'chuirp agus a' chladh
6.Meud Ciallachd
