Ansøgning:bruges til forskelligt industrielt udstyr
1.Maksimum 26 relæudgange.
2.Barrierefri transmissionsafstand er 200 meter.
3. Maksimum 4 kanaler med analog 0-10V udgang (visningsområde kan tilpasses): bakker op 2 kanaler med udvidet isoleret digitalt potentiometerudgang;
4. 2 analoge indgange; og vises på fjernbetjeningen, displayområdet kan tilpasses.
5. 1 nødstop relæudgang normalt lukket kontakt.
Model: DH01R-4W-26K
Applicable equipment:various industrial equipment
Bemærk: You can choose one of the three antennas. The suction cup antenna is standard by default.
Bemærk:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.
②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.
④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 analoge indgange(maximum 2 kanaler); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, etc.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
1）Maximum 26 relæudgange;
2）Maximum 4 kanaler med analog 0-10V udgang (visningsområde kan tilpasses): bakker op 2 kanaler med udvidet isoleret digitalt potentiometerudgang;
3）2 analog inputs; og vises på fjernbetjeningen, displayområdet kan tilpasses
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA batterier, low power consumption design;
6） Wireless operation distance is 200 meter;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.
W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)
Low voltage: The remote control battery is too low, please replace the battery.
Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, og displayet viser en værdi,indikerer vellykket opstart. Modtagerens arbejdsindikator lyser konstant.
2）Switch- og knapfunktioner
Enhver betjening af drejekontakten og knappen på fjernbetjeningen kan styre det tilsvarende kontaktsignaludgangspunkt på modtageren. Alle kontaktsignaludgangspunkter på modtageren er normalt åbne signaler som standard;
3）W1-W4 hastighedsjustering
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A og K9-B tast til at bladre gennem menuen og vælge parametre; hold K1-A nede, og tryk derefter på K9-A/B-knappen for at ændre parametre;
Afslut parametermenuen: vælge at gemme eller ikke gemme, og tryk derefter på knappen K1-A for at bekræfte afslutningen;
F1W1 rækkevidde: Visningsområdets værdi for W1-knappen på skærmen, justerbar fra 0 to 9999;
F2W2 rækkevidde: Visningsområdets værdi for W2-knappen på skærmen, justerbar fra 0 to 9999;
F3W3 rækkevidde: Visningsområdets værdi for W3-knappen på skærmen, justerbar fra 0 to 9999;
F4W4 rækkevidde: The display range value of the W4 knob on the display screen, justerbar fra 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
The final interpretation right of this product belongs only to our company.
