Toepassing:Spesiaal gebruik vir kruipdraadsaagmasjien
1.Ondersteun outomatiese snymodus, pas outomaties die loopspoed van die klein motor aan volgens die groot motorstroom, en bereik outomatiese snybeheer.
2.Versperringsvrye transmissieafstand is 200 meter.
3. Ondersteun dubbelspoedregulering vir groot motors en klein motors.
4. Ondersteun klein motor wat in plek draai.
5. Ondersteun linker- en regterwiel klein motor lineêre regstelling.
Model: DH12S-LD
Toepaslike toerusting:kruipdraadsaagmasjien
Let wel: Jy kan een van die drie antennas kies. Die suigbeker-antenna is standaard standaard.
Groot motorspoed：S1：0-50
Klein motorspoed: S2: 0-50
Maksimum spoedbeperking van outomatiese snyklein motor:F:0-30(parameters verstelbaar)
Outomatiese sny maksimum stroom: Ek sien: 0-35 (parameters verstelbaar)
Lineêre regstelling waarde: Df: -99-99 (1 eenheid is ongeveer 0.02V)
Lae spanning: Die afstandbeheerbattery is te laag, vervang asseblief die battery.
Netwerk het gedaal: Die draadlose sein word onderbreek. Kontroleer asseblief die krag van die ontvanger, skakel dit weer aan, en herbegin die afstandbeheer.
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, skakel die kragskakelaar aan, andthe display will show the motor speed, wat suksesvolle opstart aandui.
2.Large motor and speed regulation
Turn the “vorentoe/omgekeer” switch to forward, the receiver’s large motor will turn on, and the display will show forward
Turn the “vorentoe/omgekeer” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse
Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “vorentoe/omgekeer” switch to forward, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Turn the “Forward/Reverse” switch to reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
In handmatige modus:
Turn left in place: Druk en hou die “Enable” button, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Druk en hou die “Enable” button, turn the “Left/Right Turn” switch to right, die linkerwiel vorentoe en regterwiel agteruit van die ontvanger word aangeskakel, en die ontvanger begin regs in plek draai;
6.Klein motor spoedgrens aanpassing
In outomatiese modus: druk en hou die “Enable” knoppie en draai die “Klein motorspoedverstelling” om die maksimum spoed van die klein motor tydens outomatiese sny aan te pas;
7.Outomatiese sny
Die eerste stap is om die groot motor te begin; die tweede stap is om die modusskakelaar na te skakel “Outo”; die derde stap is om die klein motor te begin en die skerm sal vertoon “Sny Auto”,wat aandui dat dit die outomatiese snymodus betree het;
8. Reguitlyn regstelling
Wanneer die linker en regter loopmotors vorentoe en agtertoe beweeg, die linker- en regterspoed is inkonsekwent, en die reguitlyn loop afwyk. Jy kan die lineêre regstellingsfunksie van die afstandbeheerder gebruik om die spoed van die linker- en regterwiele fyn in te stel;
Regstellingsbeginsel: Deur die regstellingsfunksie, die spoed van die linkerwiel word fyn ingestel om dieselfde spoed as die regterwiel te bereik, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: In handmatige modus, druk en hou die “Enable” knoppie en draai die “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 aan 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (Gebruikers word verbied om dit sonder toestemming te verander)
Sommige funksies van die afstandbeheerder kan deur parameters aangepas word. In handmatige modus, when the small motor speed S2 is 10, Druk die voorwaartse/omgekeerde skakelaar drie keer in 'n ry op, and then push it down three times in a row to enter the parameter menu;
Verlaat die parameter kieslys: kies om te stoor of nie te stoor nie, then press the enable button to confirm the exit;
Maksimum stroom: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, versuim 800, Wysiging is verbode;
Vertragingsparameter: automatic cutting control parameter. Wanneer die sny huidige veranderingswaarde hierdie waarde oorskry,deceleration begins.
Versnelling A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Vertraging A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maksimum loop: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Spoedlimiet offset: the maximum speed of the small motor during automatic cutting.
Maksimum gasheer: maximum speed of large motor.
Die finale interpretasiereg van hierdie produk behoort slegs aan ons maatskappy.
